Conrod. bearings. crankshaft.
| № | Name | Ext. inf. | A* | Use of | Part number |
|---|---|---|---|---|---|
| crankshaft conrod bearings 4-cylinder
|
4-cylinder | ||||
| crankshaft conrod bearings 1.8/1.9ltr.
4-cylinder+
AEB |
1.8/1.9ltr. | 4-cylinder+ AEB |
|||
| (1) | crankshaft F >> 8D-T-283 000* |
1 |
058 105 101 | ||
| (1) | crankshaft
automatic:
AEB |
1 | automatic: AEB |
058 105 019 C | |
| (1B) | crankshaft | 1 | 026 105 101 R | ||
| 2 | woodruff key 4X5
|
4X5 | 1 | N 012 708 2 | |
| (3) | toothed belt pulley | 1 | 027 105 263 B | ||
| (3) | toothed belt pulley | 1 | 028 105 263 A | ||
| (5A) | impulse rotor | 1 | 050 105 189 | ||
| (5A) | impulse rotor | 1 | 050 105 189 B | ||
| (5A) | impulse rotor | 1 | 050 105 189 A | ||
| (5B) | countersunk bolt M6X16
|
M6X16 | 3 | 053 105 229 A | |
| (6) | socket head bolt with inner multipoint head M8X16
|
M8X16 | 4 | N 103 036 03 | |
| (6) | socket head bolt with inner multipoint head M8X16
|
M8X16 | 4 | N 103 036 01 | |
| (9) | vibration damper F >> 8D-T-273 226 |
1 |
058 105 251 | ||
| (9) | vibration damper for vehicles with air condit. F >> 8D-T-273 226 |
1 |
058 105 251 A | ||
| (9) | vibration damper | 1 | 058 105 251 E | ||
| 14 | 12-point head bolt M14X1,5X39
|
M14X1,5X39 | 1 | N 903 670 01 | |
| (15) | flywheel | 1 | 058 105 266 | ||
| (16) | cylinder pin 6X20
|
6X20 | 3 | N 013 223 2 | |
| 19 | needle bearing - 15X21X15
|
15X21X15 | 1 | 056 105 313 C | |
| (19) | bush
automatic
|
1 | automatic | 058 105 171 A | |
| 20 | clutch plate
automatic
|
1 | automatic | 058 105 323 G | |
| 20 | clutch plate
automatic
|
1 | automatic | 058 105 323 D | |
| 21 | washer 0,5
automatic
|
0,5 | 1 | automatic | 051 105 301 |
| (22) | compensation washer 1,2MM
automatic
|
1,2MM | 1 | automatic | 056 105 303 |
| (23) | hexagon bolt M10X1X43
|
M10X1X43 | 6 | N 906 604 01 | |
| (23) | hexagon bolt M10X1X43
|
M10X1X43 | 6 | N 907 059 01 | |
| (23) | 12-point head bolt M10X1X17
automatic
|
M10X1X17 | 6 | automatic | N 904 656 01 |
| 25 | 1 set: connecting rods | 1 | 027 198 401 B | ||
| 26 | big end bolt, press-fitted (rotation-angle controlled) |
8 | 048 105 425 | ||
| 27 | hexagon nut | 8 | 048 105 427 | ||
| (28) | bush - connecting rod | 4 | 053 105 431 B | ||
| 29 | 1 set of thrust washers | 1 | 026 198 421 | ||
| 30 | 1 set: crankshaft bearings | 4 | 026 198 491 | ||
| 30 | 1 set: crankshaft bearings F 8D-T-140 001>>* |
1 |
026 198 491 | ||
| 31 | connecting rod bearing shell | 4 | 034 105 701 | ||
| yellow | 034 105 701 0 07 | ||||
| 31 | connecting rod bearing shell | 4 | 034 105 701 B | ||
| yellow/violet | 034 105 701 B 4 0Z |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy