Oil sump. crankcase housing.
| № | Name | Ext. inf. | A* | Use of | Part number |
|---|---|---|---|---|---|
| crankcase housing oil sump 1.4ltr.
4-cylinder+
petrol eng.+ CPTA,CZEA |
1.4ltr. | 4-cylinder+ petrol eng.+ CPTA,CZEA |
|||
| 1 | cylinder block with pistons, crankshaft and bearings CPTA
|
1 | CPTA | 04E 103 101 | |
| (1) | crankcase housing for this use: CZEA
|
1 | CZEA | ||
| 2 | socket head collared bolt with inner multipoint head M10X80
|
M10X80 | 10 | WHT 004 877 | |
| 3 | end cap 14
|
14 | 2 | N 011 917 3 | |
| 4 | dowel sleeve 13,2X13
|
13,2X13 | 2 | 03C 103 143 | |
| 5 | end cap 12
|
12 | 1 | N 011 918 5 | |
| 6 | water jet | 4 | 04E 103 157 | ||
| 7 | end cap 22
|
22 | 2 | N 011 909 6 | |
| 8 | seal bolt with sealing ring M14X1,5X22
|
M14X1,5X22 | 1 | N 908 132 02 | |
| 9 | cylinder pin 8X16
|
8X16 | 4 | N 043 207 2 | |
| 10 | cylinder pin 6M6X20
|
6M6X20 | 1 | 026 103 139 | |
| 11 | shaft oil seal 30X7
|
30X7 | 1 | 04C 103 085 | |
| 12 | sealing flange | 1 | 04E 103 153 B | ||
| 13 | hexagon collared bolt with multi-point socket head (duo) M6X25
|
M6X25 | 6 | N 911 087 01 | |
| 14 | silicon sealant sealing flange 50ML
|
50ML | X | D 176 501 A1 | |
| 15 | socket head bolt with inner multipoint head M8X50
|
M8X50 | 2 | N 106 825 01 | |
| 16 | sealing flange | 1 | 04E 103 170 A | ||
| 17 | hex collared bolt M6X20
|
M6X20 | 6 | N 106 533 01 | |
| 18 | oil separator also use: D 176 501 A1 |
D 176 501 A1 |
1 | 04E 103 464 F | |
| 19 | oil sump-upper part | 1 | 04E 103 601 L | ||
| 20 | cover | 1 | 04E 103 729 | ||
| 21 | oil level sender see illustration, item: 919-045,1 |
919-045,1 |
|||
| 22 | hexagon collar nut see illustration, item: 919-045,3 |
919-045,3 |
|||
| 23 | hexagon socket head collared bolt, thread forming M6X16
|
M6X16 | 19 | N 107 480 01 | |
| 24 | surge lock | 1 | 04E 103 623 D | ||
| 25 | hexagon socket flat head bolt M6X14
|
M6X14 | 9 | N 907 378 03 | |
| 26 | socket head bolt with inner multipoint head M6X22
|
M6X22 | 19 | N 905 006 05 | |
| 27 | silicon sealant oil sump 50ML
|
50ML | X | D 176 501 A1 | |
| 28 | spacer plate | 1 | 04E 103 551 | ||
| 29 | engine oil sump lower part | 1 | 04E 103 602 B | ||
| 30 | vent hose | 1 | 04E 103 493 H | ||
| 31 | oil drain plug also use: M14X1,5X16
N 013 815 7 |
M14X1,5X16 N 013 815 7 |
1 | N 902 889 01 | |
| - | o-ring 14X20
N013815 |
14X20 N013815 |
1 | N 013 815 7 | |
| 32 | crankshaft bearing not for this model |
||||
| 33 | seal | 1 | 04C 103 161 D | ||
| 34 | impulse rotor not for this model |
||||
| 35 | impulse sender crankshaft see illustration, item: 906-000,8 |
906-000,8 |
|||
| 36 | control valve | 1 | 06E 115 243 G | ||
| 37 | oval hexagon socket head bolt M6X16
|
M6X16 | 1 | N 910 967 01 | |
| 38 | dowel sleeve | 2 | 022 103 139 B | ||
| 40 | threaded union | 1 | 03C 115 721 A |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy