Individual parts.
| № | Name | Ext. inf. | A* | Use of | Part number |
|---|---|---|---|---|---|
| wiring set for engine
CHZD
|
CHZD | ||||
| wiring set for engine
CHZD
|
CHZD | ||||
| (1) | wiring set for engine | 1 | 04C 972 627 A | ||
| 1 | wiring set for engine | 1 | 04C 972 627 B | ||
| individual parts | |||||
| - | * corrug. tubes, t-pieces, * clips, holders, grommets, * cable ties, insulating * hose, wiring, * single wires and seals * see special catalogue: * electrical * connecting elements |
||||
| 2 | flat contact housing with contact locking mechanism knock sensor coolant temperature sender |
1 1 |
8K0 973 702 | ||
| 3 | flat contact housing injection valve camshaft adjuster unit fuel cut-off valve |
3 1 1 |
4H0 973 702 | ||
| 4 | flat contact housing camshaft adjuster unit oil pressure sender |
1 1 |
4H0 973 702 A | ||
| 5 | flat contact housing with contact locking mechanism deceleration cut-off valve exhaust manifold with turbo- charger |
1 | 1J0 973 722 A | ||
| 6 | flat contact housing with contact locking mechanism for solenoid valve activated charcoal container |
1 | 6X0 973 722 G | ||
| 7 | flat connector housing with contact locking mechanism fuel pressure regulator |
1 | 4D0 971 993 | ||
| 8 | flat contact housing with contact locking mechanism coolant pump hall sensor |
1 2 |
4H0 973 703 | ||
| 9 | flat contact housing speed sender oil pressure sender |
1 1 |
4H0 973 703 A | ||
| 10 | flat contact housing with contact locking mechanism intake manifold charge pressure sender |
2 |
8K0 973 704 | ||
| 11 | flat connector housing with contact locking mechanism ignition coil |
3 | 4D0 971 994 | ||
| 12 | flat contact housing with contact locking mechanism throttle valve control element |
1 | 4H0 973 713 | ||
| 13 | flat contact housing with contact locking mechanism wastegate |
1 | 4H0 973 713 F | ||
| 14 | flat contact housing with contact locking mechanism central wiring set |
1 | 5Q0 973 837 | ||
| 15 | flat contact housing with contact locking mechanism engine control unit |
1 | 5Q0 906 379 | ||
| 16 | protective cap | 2 | 8K0 971 921 A | ||
| 17 | protective cap | 1 | 06A 971 921 C | ||
| 18 | protective cap | 1 | 6X0 971 921 D | ||
| 19 | flat connector housing with contact locking mechanism alternator |
1 | 4D0 971 992 | ||
| 20 | flat contact housing with contact locking mechanism a/c compressor |
1 | 8P0 973 722 | ||
| 21 | protective cap | 1 | 8J0 971 921 | ||
| 22 | cable tie with hose retainer for cable: 4,5X213MM
17-18MM |
4,5X213MM 17-18MM |
1 | N 108 201 01 | |
| 23 | cable ties toothed quadrant 4,6X193
|
4,6X193 | 3 | N 909 377 02 | |
| 24 | cable tie with terminal socket for bridge strength: securing element: 4,6X200MM
3,0-6,0MM |
4,6X200MM 3,0-6,0MM |
X | N 106 596 01 | |
| 25 | cable ties hole/sheet metal thickness: 161MM
6,5/0,6-4,0 |
161MM 6,5/0,6-4,0 |
X | WHT 005 317 | |
| 26 | cable tie with terminal socket for sheet metal thickness: 4,6X200
1-3MM |
4,6X200 1-3MM |
X | 3D0 971 838 M | |
| 27 | cable ties hole/sheet metal thickness: toothed quadrant 4,6X193
6,5 / 0,3-3,0 |
4,6X193 6,5 / 0,3-3,0 |
X | 3W0 971 838 | |
| 28 | cable holder | 1 | 03L 971 845 G |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy