| №- | Name | A* | Part number |
|---|---|---|---|
| 010 | CONTROL UNIT REAR-VIEW CAMERA RFK PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 83 26 |
| 010 | MODULATOR REAR-VIEW CAMERA PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 164 543 00 62 |
| 010 | CONTROL UNIT REAR-VIEW CAMERA PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 58 87 |
| 010 | CONTROL UNIT REAR-VIEW CAMERA IMPORTANT! HAVE CURRENT STATUS OF THE ELECTRONIC KEY CHECKED BY THE CUSTOMER BEFORE ORDERING. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 58 87 |
| 010 | CONTROL UNIT REAR-VIEW CAMERA OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | A 221 870 32 92 |
| 010 | CAMERA REAR-VIEW CAMERA FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 52 95 |
| 030 | HEXALOBULAR BOLT M5X10 |
003 | N 910142 005000 |
| 040 | CTRL. UNIT SELECTOR ANTENNA SELECTOR |
001 | A 203 820 49 85 |
| 050 | HEXALOBULAR BOLT ANTENNA SELECTOR TO BRACKET M5X10 |
002 | N 000000 001517 |
| 060 | CTRL. UNIT TRUNK CLOSING REMOTE TRUNK RELEASE HFS IMPORTANT! HAVE CURRENT STATUS OF THE ELECTRONIC KEY CHECKED BY THE CUSTOMER BEFORE ORDERING. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 63 87 |
001 | A 221 870 61 85 |
| 060 | CONTROL UNIT REMOTE TRUNK RELEASE IMPORTANT! HAVE CURRENT STATUS OF THE ELECTRONIC KEY CHECKED BY THE CUSTOMER BEFORE ORDERING. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 63 87 |
| 060 | CTRL. UNIT TRUNK CLOSING REMOTE TRUNK RELEASE OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 39 95 |
001 | A 221 870 39 92 |
| 060 | CONTROL UNIT REMOTE TRUNK RELEASE OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 39 95 |
| 070 | CONTROL UNIT EXHAUST GAS AFTERTREATMENT SCRCM PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 642 900 78 00 |
| 070 | CONTROL UNIT EXHAUST GAS AFTERTREATMENT WITH SEAT HEATER SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 642 900 99 00 |
| 070 | CONTROL UNIT EXHAUST GAS AFTERTREATMENT CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== WITH HEAT MAT PLEASE ORDER THE COVERING (MIRROR BASE) AS WELL PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 642 900 37 01 |
001 | A 642 900 09 01 |
| 070 | CONTROL UNIT EXHAUST GAS AFTERTREATMENT CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 642 900 42 01 |
001 | A 642 900 37 01 |
| 070 | CONTROL UNIT EXHAUST GAS AFTERTREATMENT CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 642 900 53 01 |
001 | A 642 900 42 01 |
| 070 | CONTROL UNIT EXHAUST GAS AFTERTREATMENT CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 642 900 53 01 |
| 070 | CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 642 900 51 01 |
001 | A 642 900 49 01 |
| 070 | CONTROL UNIT WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 642 900 63 01 |
001 | A 642 900 51 01 |
| 070 | CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 642 900 63 01 |
| 070 | CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 642 900 42 01 |
| 070 | CONTROL UNIT WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 642 900 62 01 |
001 | A 642 900 53 01 |
| 070 | CONTROL UNIT WITH HEAT MAT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 642 900 68 01 |
001 | A 642 900 62 01 |
| 070 | CONTROL UNIT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 642 900 68 01 |
| 080 | CONTROL UNIT CONJUNCTION WITH PARKING AID RDU INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 216 540 25 45 |
001 | A 216 540 09 45 |
| 080 | CTRL. UNIT DECISION UNIT CONJUNCTION WITH PARKING AID RDU INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 540 53 62 |
001 | A 216 540 25 45 |
| 080 | CTRL. UNIT DECISION UNIT CONJUNCTION WITH PARKING AID INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 540 52 62 |
001 | A 221 540 53 62 |
| 080 | CTRL. UNIT DECISION UNIT CONJUNCTION WITH PARKING AID INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 540 09 01 |
001 | A 221 540 52 62 |
| 080 | CTRL. UNIT DECISION UNIT CONJUNCTION WITH PARKING AID INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 540 36 01 |
001 | A 221 540 09 01 |
| 080 | CTRL. UNIT DECISION UNIT CONJUNCTION WITH PARKING AID INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 540 95 01 |
001 | A 221 540 36 01 |
| 080 | CONTROL UNIT CONJUNCTION WITH PARKING AID INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 540 95 01 |
| 080 | CONTROL UNIT CONJUNCTION WITH PARKING AID FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 212 900 31 00 |
001 | A 212 440 91 02 |
| 080 | CONTROL UNIT CONJUNCTION WITH PARKING AID RDU FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 212 900 31 00 |
| 085 | HEXALOBULAR BOLT CONTROL UNIT TO BRACKET M5X16 |
002 | A 001 984 64 29 |
| 085 | HEXAGON HEAD BOLT CONTROL UNITS M5X12 |
002 | N 910105 005000 |
| 090 | CONTROL UNIT PARKTRONIC SYSTEM PTS PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 540 66 45 |
| 090 | CONTROL UNIT PARKTRONIC SYSTEM INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 540 82 62 |
| 090 | CONTROL UNIT PARKTRONIC SYSTEM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 92 02 |
001 | A 221 900 53 00 |
| 090 | CONTROL UNIT PARKTRONIC SYSTEM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 08 04 |
001 | A 221 900 92 02 |
| 090 | CONTROL UNIT PARKTRONIC SYSTEM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 08 04 |
| 100 | BRACKET LUGGAGE COMPARTMENT,RIGHT INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | A 221 545 54 40 |
| 100 | BRACKET REAR END,RIGHT Replaced by: A 221 545 26 47 |
001 | A 221 545 02 47 |
| 100 | BRACKET REAR END,RIGHT |
001 | A 221 545 26 47 |
| 100 | BRACKET REAR END,RIGHT |
001 | A 221 545 27 47 |
| 100 | BRACKET LUGGAGE COMPARTMENT,RIGHT INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | A 221 545 82 40 |
| 110 | HEXAGON NUT BRACKET TO BODY SHELL M6 |
002 | N 910112 006001 |
| 120 | CONTROL UNIT KEYLESS GO KEYLESS GO KG PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 22 92 |
001 | A 221 870 79 86 |
| 120 | CONTROL UNIT KEYLESS GO KEYLESS GO 433 MHZ PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 72 92 |
001 | A 221 870 22 92 |
| 120 | CONTROL UNIT KEYLESS GO KEYLESS GO 433 MHZ PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 72 92 |
| 120 | CONTROL UNIT KEYLESS GO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 68 03 |
001 | A 221 900 82 02 |
| 120 | CONTROL UNIT KEYLESS GO WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 900 02 04 |
001 | A 221 900 68 03 |
| 120 | CONTROL UNIT KEYLESS GO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 900 02 04 |
| 120 | CONTROL UNIT KEYLESS GO KEYLESS GO KG PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 23 92 |
001 | A 221 870 80 86 |
| 120 | CONTROL UNIT KEYLESS GO KEYLESS GO 315 MHZ PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 73 92 |
001 | A 221 870 23 92 |
| 120 | CONTROL UNIT KEYLESS GO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 73 92 |
| 120 | CONTROL UNIT KEYLESS GO KEYLESS GO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 81 02 |
001 | A 221 870 00 95 |
| 120 | CONTROL UNIT KEYLESS GO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 69 03 |
001 | A 221 900 81 02 |
| 120 | CONTROL UNIT KEYLESS GO WITH HEAT MAT PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 03 04 |
001 | A 221 900 69 03 |
| 120 | CONTROL UNIT KEYLESS GO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 03 04 |
| 130 | BRACKET KEYLESS GO |
001 | A 221 545 40 47 |
| 140 | HEXAGON NUT CONTROL UNIT TO BRACKET M6 |
002 | N 910112 006001 |
| 150 | CONTROL UNIT SEATS REAR SEAT BENCH SSG-H PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 62 87 |
001 | A 221 870 21 86 |
| 150 | CONTROL UNIT SEATS REAR SEAT BENCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 34 92 |
001 | A 221 870 62 87 |
| 150 | CONTROL UNIT REAR SEAT BENCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 34 92 |
| 150 | CONTROL UNIT SEATS REAR SEAT BENCH SSG-H PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 61 87 |
001 | A 221 870 20 86 |
| 150 | CONTROL UNIT SEATS REAR SEAT BENCH SSG-H PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 61 87 |
| 150 | CONTROL UNIT SEATS REAR SEAT BENCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 72 93 |
001 | A 221 870 29 87 |
| 150 | CONTROL UNIT REAR SEAT BENCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 22 02 |
001 | A 221 870 72 93 |
| 150 | CONTROL UNIT REAR SEAT BENCH PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 22 02 |
| 170 | BRACKET LUGGAGE COMPARTMENT,RIGHT WITH HEAT MAT Replaced by: A 221 545 53 40 |
001 | A 221 545 53 40 |
| 170 | BRACKET LUGGAGE COMPARTMENT,RIGHT |
001 | A 221 545 53 40 |
| 180 | HEXAGON NUT BRACKET TO BODY SHELL M6 |
001 | N 910112 006001 |
| 190 | HEXAGON HEAD BOLT BRACKET TO BODY SHELL M6X10 |
002 | N 000000 004310 |
| 190 | HEXAGON HEAD BOLT BRACKET TO BODY SHELL M6X16 |
002 | N 910105 006023 |
| 190 | HEXAGON HEAD BOLT BRACKET TO BODY SHELL M6X16 |
002 | N 910105 006023 |
| 200 | CONTROL UNIT DISTANCE RADAR ALSO VALID FOR CODE 810 SEE VEDOC/CERTIFICATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 000 900 48 00 |
001 | A 216 900 55 00 |
| 200 | CONTROL UNIT DISTANCE RADAR ALSO VALID FOR CODE 810 SEE VEDOC/CERTIFICATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 000 900 29 01 |
001 | A 000 900 48 00 |
| 200 | CONTROL UNIT DISTANCE RADAR ALSO VALID FOR CODE 810 SEE VEDOC/CERTIFICATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 000 900 44 01 |
001 | A 000 900 29 01 |
| 200 | CONTROL UNIT DISTANCE RADAR ALSO VALID FOR CODE 810 SEE VEDOC/CERTIFICATION PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 000 900 44 01 |
| 200 | CONTROL UNIT DISTANCE RADAR CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 000 900 46 01 |
001 | A 000 900 47 00 |
| 200 | CONTROL UNIT DISTANCE RADAR CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 000 900 46 01 |
| 200 | CONTROL UNIT SEATS MULTICONTOUR SEAT, REAR MKS INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 21 92 |
002 | A 221 870 91 86 |
| 200 | CONTROL UNIT SEATS MULTICONTOUR SEAT, REAR MKS INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 35 93 |
002 | A 221 870 21 92 |
| 200 | CONTROL UNIT SEATS MULTICONTOUR SEAT, REAR MKS INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
002 | A 221 870 35 93 |
| 200 | CONTROL UNIT SEATS MULTICONTOUR SEAT, REAR FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 216 900 06 00 |
002 | A 216 870 00 93 |
| 200 | CONTROL UNIT MULTICONTOUR SEAT, REAR FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 216 900 14 00 |
002 | A 216 900 06 00 |
| 200 | CONTROL UNIT MULTICONTOUR SEAT, REAR FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 216 900 26 00 |
002 | A 216 900 14 00 |
| 200 | CONTROL UNIT MULTICONTOUR SEAT, REAR MKS FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 216 900 44 00 |
002 | A 216 900 26 00 |
| 200 | CONTROL UNIT MULTICONTOUR SEAT, REAR FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
002 | A 216 900 44 00 |
| 250 | BRACKET LUGGAGE COMPARTMENT,LEFT INCLUDE IN ORDER 2X A 126 997 00 34 Replaced by: A 221 545 09 47 |
001 | A 221 545 48 40 |
| 250 | BRACKET LUGGAGE COMPARTMENT,LEFT INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | A 221 545 09 47 |
| 250 | BRACKET LUGGAGE COMPARTMENT,LEFT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I |
001 | A 221 545 09 47 |
| 260 | HEXAGON NUT BRACKET TO BODY SHELL M6 INCLUDE IN ORDER 2X A 126 997 00 34 |
002 | N 910112 006001 |
| 260 | HEXAGON NUT BRACKET TO BODY SHELL M6 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I |
002 | N 910112 006001 |
| 270 | HEXAGON HEAD BOLT BRACKET TO BODY SHELL M6X10 |
001 | N 000000 004310 |
| 270 | HEXAGON HEAD BOLT BRACKET TO BODY SHELL M6X16 INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | N 910105 006023 |
| 270 | HEXAGON HEAD BOLT M6X16 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I |
001 | N 910105 006023 |
| 300 | CONTROL UNIT ON-BOARD ELEC. SUPPLY CONTROL MODULE BSG PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 540 04 01 |
| 313 | RELAY ON-BOARD ELEC. SUPPLY CONTROL MODULE |
001 | A 003 542 01 19 |
| 316 | SECURING ON-BOARD ELEC. SUPPLY CONTROL MODULE |
001 | N 000000 003688 |
| 317 | FUSE LINK ON-BOARD ELEC. SUPPLY CONTROL MODULE 80A |
001 | N 000000 002800 |
| 317 | FUSE LINK ON-BOARD ELEC. SUPPLY CONTROL MODULE 150A |
001 | N 000000 000432 |
| 317 | FUSE LINK ON-BOARD ELEC. SUPPLY CONTROL MODULE 200A |
001 | N 000000 000316 |
| 317 | FUSE LINK ON-BOARD ELEC. SUPPLY CONTROL MODULE 100A |
001 | N 000000 002801 |
| 318 | FUSE LINK ON-BOARD ELEC. SUPPLY CONTROL MODULE 5A |
001 | N 000000 001923 |
| 320 | BRACKET ON REAR PANEL |
001 | A 221 545 78 40 |
| 330 | HEXAGON NUT BRACKET TO BODY SHELL M6 |
004 | N 910112 006001 |
| 335 | HEXAGON NUT CONTROL UNIT TO BRACKET M6 |
003 | N 910112 006001 |
| 340 | CTRL. UNIT EMERGENCY CALL TELE AID PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 204 820 20 85 |
001 | A 221 870 87 26 |
| 340 | CONTROL UNIT TELE AID PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 166 900 34 00 |
001 | A 204 820 20 85 |
| 340 | CONTROL UNIT TELE AID |
001 | A 166 900 34 00 |
| 360 | BRACKET TELEAID CONTROL UNIT FASTENING INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | A 221 545 33 40 |
| 360 | BRACKET TELEAID CONTROL UNIT FASTENING FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I |
001 | A 221 545 17 47 |
| 365 | HEXAGON NUT BRACKET MOUNTING M6 |
003 | N 910112 006001 |
| 370 | NUT CONTROL UNIT TO BRACKET M6 |
004 | N 000000 003477 |
| 380 | CTRL. UNIT TRAILER CONN. HITCHING MECHANISM INCLUDE IN ORDER 2X A 126 997 00 34 Replaced by: A 204 545 50 32 |
001 | A 221 545 08 32 |
| 380 | CONTROL UNIT HITCHING MECHANISM INCLUDE IN ORDER 2X A 126 997 00 34 Replaced by: A 204 545 91 32 |
001 | A 204 545 50 32 |
| 380 | CONTROL UNIT HITCHING MECHANISM INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | A 204 545 91 32 |
| 380 | CONTROL UNIT HITCHING MECHANISM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 212 900 19 01 |
001 | A 212 900 00 00 |
| 380 | CONTROL UNIT HITCHING MECHANISM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 204 900 79 05 |
001 | A 212 900 19 01 |
| 380 | CONTROL UNIT HITCHING MECHANISM FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 204 900 79 05 |
| 390 | EXPANSION RIVET CONTROL UNIT FIXTURE |
001 | A 000 991 66 40 |
| 450 | BRACKET CENTRAL ELECTRICAL SYSTEM |
001 | A 221 820 09 14 |
| 500 | CONTROL UNIT DUAL BAND COMPENSATOR, IN LEFT OF TRUNK |
001 | A 211 820 08 85 |
| 500 | CONTROL UNIT DUAL BAND COMPENSATOR, IN LEFT OF TRUNK IMPORTANT! HAVE CURRENT STATUS OF THE ELECTRONIC KEY CHECKED BY THE CUSTOMER BEFORE ORDERING. |
001 | A 211 820 08 85 |
| 500 | AMPLIFIER DUAL BAND COMPENSATOR, IN LEFT OF TRUNK OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 905 49 00 |
001 | A 219 820 37 89 |
| 500 | ANTENNA AMPLIFIER DUAL BAND COMPENSATOR, IN LEFT OF TRUNK OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 905 50 00 |
001 | A 221 905 49 00 |
| 500 | ANTENNA AMPLIFIER DUAL BAND COMPENSATOR, IN LEFT OF TRUNK OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH WITH HEAT MAT Replaced by: A 221 905 00 40 |
001 | A 221 905 50 00 |
| 500 | ANTENNA AMPLIFIER DUAL BAND COMPENSATOR, IN LEFT OF TRUNK OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH |
001 | A 221 905 00 40 |
| 510 | BRACKET DUAL BAND COMPENSATOR, IN LEFT OF TRUNK Replaced by: A 221 545 06 47 |
001 | A 221 545 47 40 |
| 510 | BRACKET DUAL BAND COMPENSATOR, IN LEFT OF TRUNK |
001 | A 221 545 06 47 |
| 520 | HEXAGON NUT BRACKET MOUNTING M5 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: N 913023 005002 |
002 | N 910112 005000 |
| 520 | NUT BRACKET MOUNTING M5 |
002 | N 913023 005002 |
| 520 | NUT COMPENSATOR TO BRACKET M5 |
004 | N 913023 005002 |
| 530 | HEXALOBULAR BOLT COMPENSATOR TO BRACKET M4X8 |
003 | N 000000 001933 |
| 530 | HEXALOBULAR BOLT COMPENSATOR TO BRACKET M4X8 IMPORTANT! HAVE CURRENT STATUS OF THE ELECTRONIC KEY CHECKED BY THE CUSTOMER BEFORE ORDERING. |
003 | N 000000 001933 |
| 540 | HEXAGON NUT MOUNTING, ELECTRICAL CENTER M6 |
002 | N 910112 006003 |
| 550 | BRACKET SAM/SRB REAR Replaced by: A 221 540 12 40 |
001 | A 221 540 00 40 |
| 550 | BRACKET SAM/SRB REAR |
001 | A 221 540 12 40 |
| 560 | HEXAGON NUT FASTENING, SAM BRACKET TO REAR M6 |
004 | N 910112 006001 |
| 570 | ELECTRICAL CENTER FUSE AND RELAY MODULE, REAR SRB IMPORTANT! HAVE CURRENT STATUS OF THE ELECTRONIC KEY CHECKED BY THE CUSTOMER BEFORE ORDERING. |
001 | A 221 545 08 01 |
| 570 | ELECTRICAL CENTER FUSE AND RELAY MODULE, REAR OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH Replaced by: A 221 545 14 01 |
001 | A 221 545 12 01 |
| 570 | ELECTRICAL CENTER FUSE AND RELAY MODULE, REAR OBSERVE WORK INSTRUCTIONS IN WIS WIS-NET#GF40.10-P-0804B# WHEN ORDERING PLEASE INCLUDE THE SPECIAL VERSION (VEHICLE DATA CARD) AND IF APPLIC.NEW DETACH.BODY COMPON.W/IDENT.NO.MATCH |
001 | A 221 545 14 01 |
| 570 | FUSE- A. RELAYBOX FUSE AND RELAY MODULE, REAR |
001 | A 221 906 70 00 |
| 575 | RELAY TERMINAL 15 |
001 | A 002 542 13 19 |
| 575 | RELAY CIRCUIT 15R |
001 | A 002 542 13 19 |
| 575 | RELAY PLUG SOCKETS |
001 | A 002 542 13 19 |
| 575 | RELAY LOW TEMPERATURE PUMP |
001 | A 002 542 13 19 |
| 575 | RELAY CIGAR LIGHTER |
001 | A 002 542 13 19 |
| 575 | RELAY FUEL PUMP |
001 | A 002 542 13 19 |
| 575 | RELAY REAR WINDOW PANE |
001 | A 002 542 26 19 |
| 580 | CONTROL UNIT SAM SIGNAL ACQUISITION AND ACTUATION MODULE IN REAR SAM-H WITH HEAT MAT CONTROL MODULE MUST BE FLASHED WITH ATTENDANT FLASHWARE Replaced by: A 221 545 85 32 |
001 | A 221 545 48 32 |
| 580 | CONTROL UNIT SIGNAL ACQUISITION AND ACTUATION MODULE IN REAR SAM-H CONTROL MODULE MUST BE FLASHED WITH ATTENDANT FLASHWARE |
001 | A 221 545 85 32 |
| 580 | CONTROL UNIT SAM SIGNAL ACQUISITION AND ACTUATION MODULE IN REAR SAM-H WITH HEAT MAT CONTROL MODULE MUST BE FLASHED WITH ATTENDANT FLASHWARE Replaced by: A 221 901 30 00 |
001 | A 221 545 07 16 |
| 580 | CONTROL UNIT SIGNAL ACQUISITION AND ACTUATION MODULE IN REAR SAM-H CONTROL MODULE MUST BE FLASHED WITH ATTENDANT FLASHWARE |
001 | A 221 901 30 00 |
| 630 | NUT BRACKET TO BODY SHELL M5 INCLUDE IN ORDER 2X A 126 997 00 34 |
002 | N 913023 005002 |
| 630 | HEXAGON NUT TUNER, TV TO BRACKET M5 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: N 913023 005002 |
001 | N 910112 005000 |
| 630 | NUT TUNER, TV TO BRACKET M5 |
001 | N 913023 005002 |
| 635 | BRACKET TUNER,TV |
001 | A 221 545 58 40 |
| 635 | BRACKET TUNER,TV |
001 | A 221 545 51 47 |
| 635 | BRACKET TUNER,TV WITH HEAT MAT Replaced by: A 221 545 50 47 |
001 | A 221 545 29 47 |
| 635 | BRACKET TUNER,TV |
001 | A 221 545 50 47 |
| 640 | TAPPING SCREW BRACKET TO BODY SHELL 4.8X13 |
001 | N 000000 000535 |
| 640 | TAPPING SCREW BRACKET TO BODY SHELL 4.8X13 |
002 | N 000000 000535 |
| 650 | CONTROL UNIT LINGUATRONIC LANGUAGE CONTROL SYSTEM IN GERMAN SBS INCLUDE IN ORDER 2X A 126 997 00 34 Replaced by: A 221 870 31 87 |
001 | A 221 870 55 87 |
| 650 | CONTROL UNIT LINGUATRONIC LANGUAGE CONTROL SYSTEM IN GERMAN INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 05 95 |
001 | A 221 870 31 87 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN GERMAN INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | A 221 870 05 95 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN FRENCH SBS PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 66 26 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN FRENCH THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 32 87 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN SPANISH SBS PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 67 26 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN SPANISH THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 33 87 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN ITALIAN SBS PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 68 26 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN ITALIAN THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 34 87 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN ENGLISH SBS |
001 | A 221 870 56 87 |
| 650 | CONTROL UNIT LINGUATRONIC LANGUAGE CONTROL SYSTEM IN ENGLISH THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 35 87 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN SWISS GERMAN SBS PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 70 26 |
| 650 | CONTROL UNIT LANGUAGE CONTROL SYSTEM IN SWISS GERMAN THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 36 87 |
| 650 | CONTROL UNIT VOICE CONTROL SYSTEM IN DUTCH SBS PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 72 26 |
| 650 | CONTROL UNIT VOICE CONTROL SYSTEM IN DUTCH THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 37 87 |
| 650 | CONTROL UNIT LINGUATRONIC VOICE CONTROL SYSTEM IN AMERICAN SBS |
001 | A 221 870 57 87 |
| 650 | CONTROL UNIT LINGUATRONIC VOICE CONTROL SYSTEM IN AMERICAN PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 20 92 |
| 650 | CONTROL UNIT VOICE CONTROL SYSTEM IN AMERICAN THIS PART NUMBER CAN BE USED TO REQUEST A RETROFIT (SOFTWARE RETROFIT), ENABLE THEN TAKES PLACE VIA FDOK/VDOC, IMPLEMENTATION TAKES PLACE VIA THE SCN PROCESS. INCLUDE IN ORDER 2X A 126 997 00 34 PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 38 87 |
| 660 | HEXAGON NUT LINGUATRONIC M5 INCLUDE IN ORDER 2X A 126 997 00 34 |
001 | N 910112 005000 |
| 700 | AMPLIFIER SOUND AMPLIFIER PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 28 89 |
001 | A 221 820 76 89 |
| 700 | AMPLIFIER SOUND AMPLIFIER PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 820 90 89 |
001 | A 221 870 28 89 |
| 700 | AMPLIFIER SOUND AMPLIFIER PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 870 46 89 |
001 | A 221 820 90 89 |
| 700 | AMPLIFIER SOUND AMPLIFIER PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 34 02 |
001 | A 221 870 46 89 |
| 700 | CONTROL UNIT SOUND AMPLIFIER PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 900 34 02 |
| 700 | AMPLIFIER SOUND AMPLIFIER SND INCLUDE IN ORDER 2X A 126 997 00 34 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 17 89 |
001 | A 221 870 15 89 |
| 700 | AMPLIFIER SOUND AMPLIFIER SND INCLUDE IN ORDER 2X A 126 997 00 34 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 820 87 89 |
001 | A 221 870 17 89 |
| 700 | AMPLIFIER SND INCLUDE IN ORDER 2X A 126 997 00 34 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 50 89 |
001 | A 221 820 87 89 |
| 700 | AMPLIFIER SND INCLUDE IN ORDER 2X A 126 997 00 34 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART Replaced by: A 221 870 77 89 |
001 | A 221 870 50 89 |
| 700 | AMPLIFIER SND INCLUDE IN ORDER 2X A 126 997 00 34 NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART. PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART |
001 | A 221 870 77 89 |
| 700 | CONTROL UNIT SOUND AMPLIFIER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I Replaced by: A 221 900 43 02 |
001 | A 221 900 05 02 |
| 700 | CONTROL UNIT SOUND AMPLIFIER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I Replaced by: A 221 900 53 02 |
001 | A 221 900 43 02 |
| 700 | CONTROL UNIT SOUND AMPLIFIER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I Replaced by: A 221 900 81 03 |
001 | A 221 900 53 02 |
| 700 | CONTROL UNIT SOUND AMPLIFIER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. I WORKSHOP KEY ORDER FBS3 I I ============================================I=============================I=========I I I I USE I I ES2 I I I I ============================================I=============================I=========I I I I BLOCK KEY TRACK I USING WORKSHOP KEY I NO.0100 I I I I RELEASE KEY TRACK I USING WORKSHOP KEY I NO.0101 I I I I PERSONALIZE REPLACEMENT EZS BE SURE TO I I I I I I SPECIFY THE FIRST 16 DIGITS OF THE SERIAL I I I I I I NUMBER FROM NEW EZS I USING WORKSHOP KEY I NO.0102 I I I I ACTIVATE REPLACEMENT EIS I USING WORKSHOP KEY I NO.0103 I I I I REMOVE REPLACEMENT ELV TRANSP. PROTECTION I USING WORKSHOP KEY I NO.0104 I I I I PERSONALIZE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0105 I I I I ACTIVATE REPLACEMENT ELV I USING WORKSHOP KEY I NO.0106 I I I I EIS DISGNOSIS I USING WORKSHOP KEY I NO.0107 I I I I ELV ELEC. STG. COLUMN ADJUSTMENT DIAGNOSIS I USING WORKSHOP CODE I NO.0108 I I I I KEY TRACK CONDITION IN VEHICLE I I I I DISPLAY I USING WORKSHOP KEY I NO.0109 I I LAST KEY USED I USING WORKSHOP KEY I NO.0110 I I KEY UTILIZATION VERIFICATION. I BY MEANS OF WORKSHOP KEY... I NO.0111 I I I I ====================================================================================I |
001 | A 221 900 81 03 |
| 700 | AMPLIFIER F AUTO-HIFI B&O WITH HEAT MAT Replaced by: A 221 870 94 89 |
001 | A 221 870 88 89 |
| 703 | NUT SOUND AMPLIFIER M5 |
004 | N 913023 005002 |
| 703 | HEXAGON NUT TO CONTROL UNIT M6 |
002 | N 910112 006001 |
| 710 | AMPLIFIER F AUTO-HIFI B&O PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 870 94 89 |
| 713 | CONTROL UNIT SOUND ICE WITH HEAT MAT Replaced by: A 221 900 95 03 |
001 | A 221 900 95 02 |
| 713 | CONTROL UNIT SOUND 6 CHANNEL ICE WITH HEAT MAT Replaced by: A 221 900 77 04 |
001 | A 221 900 95 03 |
| 713 | CONTROL UNIT SOUND 6 CHANNEL ICE PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 77 04 |
| 716 | CONTROL UNIT SOUND 16 CHANNEL ASK PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 72 04 |
001 | A 221 900 60 04 |
| 716 | CONTROL UNIT SOUND 16 CHANNEL ASK PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 221 900 76 04 |
001 | A 221 900 72 04 |
| 716 | CONTROL UNIT SOUND 16 CHANNEL ASK PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 221 900 76 04 |
| 719 | BRACKET SOUND AMPLIFIER |
001 | A 221 545 11 47 |
| 722 | COVER PLATE SOUND AMPLIFIER |
001 | A 221 545 02 46 |
| 725 | HEXAGON NUT FASTENING, BRACKET / COVER PANEL M5 |
008 | N 910112 005000 |
| 730 | RELAY FOR BACKUP BATTERY WITH HEAT MAT Replaced by: A 000 982 20 23 |
001 | A 000 982 02 23 |
| 730 | RELAY FOR BACKUP BATTERY |
001 | A 000 982 20 23 |
| 740 | NUT RELAY MOUNTING M6 |
002 | N 000000 003477 |
| 750 | RECEIVER SDAR SERVICES SATELLITE RADIO SRU PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 216 820 15 89 |
001 | A 221 820 77 89 |
| 750 | RECEIVER SATELLITE RADIO |
001 | A 216 820 29 89 |
| 750 | RECEIVER SDAR SERVICES SATELLITE RADIO Replaced by: A 216 820 21 89 |
001 | A 216 820 15 89 |
| 750 | RECEIVER SDAR SERVICES SATELLITE RADIO |
001 | A 216 820 21 89 |
| 750 | RECEIVER SDAR SERVICES SATELLITE RADIO |
001 | A 216 820 30 89 |
| 750 | COMBI RADIO-RECEIVER |
001 | A 171 870 15 89 |
| 750 | RECEIVER |
001 | A 171 870 08 89 |
| 750 | COMBI RADIO-RECEIVER | 001 | A 171 870 15 89 |
| 750 | CONTROL UNIT SATELLITE RADIO SDARS GEN 3 |
001 | A 216 820 35 89 |
| 750 | COMBI RADIO-RECEIVER SATELLITE RADIO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 171 906 32 00 |
001 | A 171 906 09 00 |
| 750 | COMBI RADIO-RECEIVER SATELLITE RADIO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 171 906 32 00 |
| 750 | COMBI RADIO-RECEIVER SATELLITE RADIO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE |
001 | A 171 906 35 00 |
| 750 | RECEIVER DAB DIGITAL RADIO PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE Replaced by: A 204 870 31 90 |
001 | A 204 870 02 90 |
| 750 | RECEIVER DAB DIGITAL RADIO Replaced by: A 204 870 54 90 |
001 | A 204 870 31 90 |
| 750 | RECEIVER DAB DIGITAL RADIO DAB Replaced by: A 204 870 18 96 |
001 | A 204 870 54 90 |
| 750 | CONTROL UNIT DIGITAL RADIO |
001 | A 204 870 18 96 |
| 750 | CONTROL UNIT DIGITAL RADIO |
001 | A 221 900 01 00 |
| 760 | HEXAGON NUT SATELLITE RADIO RECEIVER HOLDER M5 THE OLD PART MUST NO LONGER BE INSTALLED Replaced by: N 913023 005002 |
003 | N 910112 005000 |
| 760 | NUT SATELLITE RADIO RECEIVER HOLDER M5 |
003 | N 913023 005002 |
| 765 | BRACKET SATELLITE RADIO RECEIVER |
001 | A 221 545 79 40 |
| 767 | TAPPING SCREW BRACKET MOUNTING 4.8X13 |
001 | N 000000 000535 |
| 770 | BRACKET SOUND AMPLIFIER BRACKET |
001 | A 221 545 10 47 |
| 771 | ELASTOMER BEARING AT BRACKET |
004 | A 272 141 04 87 |
| 772 | BLIND RIVET AT BRACKET 4X10 |
004 | A 003 990 98 97 |
| 773 | TAPPING SCREW AT BRACKET 4.8X13 |
002 | N 000000 000535 |
| 775 | HEXAGON NUT BRACKET MOUNTING M6 |
002 | N 910112 006001 |
| 900 | FUSE BOX SAM/SRB REAR N10/2 |
001 | A 211 545 05 01 |
| 901 | FUSE BOX SAM/SRB REAR N10/2 |
001 | A 211 545 09 01 |
| 902 | FUSE BOX TRAILER COUPLING N10/2 |
001 | A 211 545 09 01 |
| 902 | FUSE BOX REAR-VIEW CAMERA 1-PIN SPT;N10/2 |
001 | A 004 545 57 01 |
| 903 | CONTACT SPRING SAM/SRB REAR 0.5-1.0 MM2 SPT;N10/2 |
NB | A 011 545 84 26 |
| 903 | FUSE LINK SAM/SRB REAR 7.5A;N10/2 |
NB | N 072581 000303 |
| 903 | CONTACT SPRING REAR-VIEW CAMERA 0.5-1.0 MM2 SPT;N10/2 |
NB | A 011 545 84 26 |
| 904 | FUSE BOX TRAILER COUPLING n10/2 |
001 | A 003 545 88 01 |
| 905 | CLUTCH SAM/SRB CONTROL MODULE REAR NEUTRAL 4-PIN MQS;N10/2 |
001 | A 038 545 12 28 |
| 906 | FEMALE CONTACT SAM/SRB CONTROL MODULE REAR NEUTRAL 0.25-0.5 MM2 MQS;N10/2 |
NB | A 016 545 41 26 |
| 906 | ELECTRICAL CABLE SAM/SRB CONTROL MODULE REAR NEUTRAL 0.75 MM2 MQS;N10/2 |
NB | A 000 540 46 05 |
| 907 | FUSE BOX TRAILER COUPLING n10/2 |
001 | A 003 545 87 01 |
| 908 | CONTACT SPRING TRAILER COUPLING 1.0-2.5 MM2 SPT;n10/2 |
NB | A 004 545 52 26 |
| 908 | FUSE LINK TRAILER COUPLING 15A;n10/2 |
NB | N 072581 000305 |
| 908 | FUSE LINK TRAILER COUPLING 20A;n10/2 Replaced by: N 000000 004206 |
NB | N 072581 000306 |
| 908 | FUSE LINK TRAILER COUPLING C-20;n10/2 |
NB | N 000000 004206 |
| 908 | FUSE LINK TRAILER COUPLING 25A;n10/2 Replaced by: N 000000 004207 |
NB | N 072581 000307 |
| 908 | FUSE LINK TRAILER COUPLING C-25;n10/2 |
NB | N 000000 004207 |
| 910 | PLUG HOUSING PTS OUTPUT STAGE 18-PIN JPT;N62 |
001 | A 210 545 00 40 |
| 910 | COVER PTS OUTPUT STAGE N62 |
001 | A 210 545 05 03 |
| 910 | PLUG HOUSING PTS OUTPUT STAGE 2-PIN JPT;N62 |
001 | A 210 545 13 28 |
| 910 | PLUG HOUSING PTS OUTPUT STAGE 12-PIN JPT;N62 |
001 | A 210 545 01 40 |
| 910 | CAP PTS OUTPUT STAGE N62 |
001 | A 210 545 08 03 |
| 910 | PIN BUSHING HOUSING CONJUNCTION WITH PARKING AID 32-PIN MQS;N62/1 |
001 | A 002 545 05 40 |
| 910 | COVER CONJUNCTION WITH PARKING AID 32-PIN MQS;N62/1 |
001 | A 005 545 28 30 |
| 910 | COVER CONJUNCTION WITH PARKING AID MQS;TO A 005 545 28 30 |
001 | A 000 545 91 03 |
| 912 | CONTACT SPRING PTS OUTPUT STAGE 0.5-1.0 MM2 JPT;N62 |
NB | A 011 545 81 26 |
| 912 | FEMALE CONTACT CONJUNCTION WITH PARKING AID 0.25-0.5 MM2 MQS;N62/1 |
NB | A 016 545 41 26 |
| 912 | ELECTRICAL CABLE CONJUNCTION WITH PARKING AID 0.75 MM2 MQS;N62/1 |
NB | A 000 540 46 05 |
| 913 | PLUG HOUSING SIGNAL EVALUATION MODULE, REAR 28-PIN MQS;N10/2 |
001 | A 001 545 49 40 |
| 913 | CAP SIGNAL EVALUATION MODULE, REAR N10/2 |
001 | A 001 545 08 83 |
| 914 | FEMALE CONTACT SIGNAL EVALUATION MODULE, REAR 0.25-0.5 MM2 MQS;N10/2 |
NB | A 016 545 41 26 |
| 914 | ELECTRICAL CABLE SIGNAL EVALUATION MODULE, REAR 0.75 MM2 MQS;N10/2 |
NB | A 000 540 46 05 |
| 915 | PIN BUSHING HOUSING SIGNAL EVALUATION MODULE, REAR 2-PIN SLK2.8;N10/2 |
001 | A 220 545 55 28 |
| 916 | FEMALE CONTACT SIGNAL EVALUATION MODULE, REAR 1.5-2.5 MM2 SLK2.8;N10/2 |
NB | A 013 545 16 26 |
| 917 | FUSE BOX REAR-VIEW CAMERA N10/2 |
001 | A 211 545 05 01 |
| 918 | CONTACT SPRING REAR-VIEW CAMERA 0.5-1.0 MM2 SPT;N10/2 |
NB | A 011 545 84 26 |
| 918 | FUSE LINK REAR-VIEW CAMERA 5A;N10/2 Replaced by: N 000000 004202 |
NB | N 072581 000302 |
| 918 | FUSE LINK REAR-VIEW CAMERA C-5;N10/2 |
NB | N 000000 004202 |
| 920 | FEMALE CONTACT CONTROL UNIT, BACKUP CAMERA 0.25-0.5 MM2 MQS;N66/2 |
NB | A 016 545 41 26 |
| 921 | FUSE BOX TELEVISION TUNER N10/2 |
001 | A 003 545 92 01 |
| 922 | CONTACT SPRING TELEVISION TUNER 0.5-1.0 MM2 SPT;N10/2 |
NB | A 011 545 84 26 |
| 922 | FUSE LINK TELEVISION TUNER 40A;N10/2 |
NB | N 910153 000000 |
| 923 | PIN BUSHING HOUSING SOUND AMPLIFIER 14-PIN SLK2.8;N40/3,N93/1 |
001 | A 220 545 37 28 |
| 923 | PIN BUSHING HOUSING SOUND AMPLIFIER 14-PIN SLK2.8;N40/3 |
001 | A 220 545 99 28 |
| 923 | PLUG HOUSING SOUND AMPLIFIER 4-PIN SLK2.8;N93/1 |
001 | A 220 545 39 28 |
| 923 | SOCKET HOUSING SOUND AMPLIFIER 4-PIN MQS;N40/3 |
001 | A 037 545 65 28 |
| 923 | PLUG HOUSING SOUND AMPLIFIER 4-PIN MQS;N40/3,N93/1 |
001 | A 002 545 84 40 |
| 923 | HOUSING SOUND AMPLIFIER 6-PIN MQS, MOST;N40/3,N93/1 |
001 | A 000 545 84 30 |
| 923 | RIGHT-ANGLE PLUG SOUND AMPLIFIER N40/3 , N93/1 |
001 | A 021 545 83 26 |
| 923 | PIN BUSHING HOUSING AUDIO GATEWAY CONTROL MODULE 2-PIN MOST;N93/1,N40/3 |
001 | A 002 545 90 40 |
| 923 | PIN BUSHING HOUSING AUDIO GATEWAY CONTROL MODULE 2-PIN MOST;N93/1,N40/3 |
001 | A 002 545 90 40 |
| 924 | FEMALE CONTACT SOUND AMPLIFIER 0.25-0.5 MM2 MQS;N40/3 |
NB | A 016 545 41 26 |
| 924 | FEMALE CONTACT SOUND AMPLIFIER 0.75-1.0 MM2 SLK2.8;N40/3,N93/1 |
NB | A 013 545 15 26 |
| 924 | CONTACT SPRING SOUND AMPLIFIER 0.22-0.5 MM2 SLK2.8;N40/3,N93/1 |
NB | A 013 545 14 26 |
| 924 | ELECTRICAL CABLE SOUND AMPLIFIER 4.0 MM2 SLK;N40/3,N93/1 |
NB | A 000 540 41 05 |
| 924 | FEMALE CONTACT SOUND AMPLIFIER 0.25-0.5 MM2 MQS;N40/3,N93/1 |
NB | A 016 545 41 26 |
| 924 | ELECTRICAL CABLE SOUND AMPLIFIER 0.75 MM2 MQS;N40/3,N93/1 |
NB | A 000 540 46 05 |
| 925 | PLUG HOUSING COMAND 4-PIN SLK2.8;N10/2 |
001 | A 220 545 39 28 |
| 926 | CONTACT SPRING COMAND 0.22-0.5 MM2 SLK2.8;N10/2 |
NB | A 013 545 14 26 |
| 926 | FEMALE CONTACT COMAND 1.5-2.5 MM2 SLK2.8;N10/2 |
NB | A 013 545 16 26 |
| 935 | SOCKET HOUSING E-NET COMPENSATOR 4-PIN MQS;A28/3 |
001 | A 037 545 65 28 |
| 936 | ELECTRICAL CABLE E-NET COMPENSATOR 0.75 MM2 MQS;A28/3 ON SEAT BELT WITH CODE 223 NO SEAT BELT BUCKLE IS AVAILABLE IN PARTS SCOPE SEE WIS FOR REPAIR INSTRUCTIONS. ================================================================================================= SOLDER CONNECTOR SLEEVES: TOTAL WIRE CROSS-SECTION: A 001 546 99 41 GREEN 0.7 - 2.4 MM2 A 002 546 00 41 RED 2.0 - 4.0 MM2 A 002 546 01 41 BLUE 3.5 - 8.0 MM2 A 002 546 11 41 YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2 =================================================================================================== |
NB | A 000 540 46 05 |
| 937 | FUSE BOX SAM/SRB REAR N10/2 |
001 | A 003 545 90 01 |
| 937 | FUSE LINK SAM/SRB REAR 7.5A;N10/2 |
NB | N 072581 000303 |
| 938 | CONTACT SPRING SAM/SRB REAR 1.0-2.5 MM2 SPT;N10/2 |
NB | A 004 545 52 26 |
| 939 | FUSE BOX SAM/SRB REAR N10/2 |
001 | A 003 545 91 01 |
| 939 | FUSE LINK SAM/SRB REAR 5A;N10/2 Replaced by: N 000000 004202 |
NB | N 072581 000302 |
| 939 | FUSE LINK SAM/SRB REAR C-5;N10/2 |
NB | N 000000 004202 |
| 940 | CONTACT SPRING SAM/SRB REAR 0.5-1.0 MM2 SPT;N10/2 |
NB | A 011 545 84 26 |
| 943 | PIN BUSHING HOUSING VOICE CONTROL CONTROL MODULE 20-PIN;N41/3 |
001 | A 002 545 86 40 |
| 943 | PIN BUSHING HOUSING VOICE CONTROL CONTROL MODULE 2-PIN MOST;N41/3 |
001 | A 002 545 90 40 |
| 943 | HOUSING VOICE CONTROL CONTROL MODULE 22-PIN MQS;N41/3 |
001 | A 000 545 90 30 |
| 944 | FEMALE CONTACT VOICE CONTROL CONTROL MODULE 0.25-0.5 MM2 MQS;N41/3 |
NB | A 016 545 41 26 |
| 944 | ELECTRICAL CABLE VOICE CONTROL CONTROL MODULE 0.75 MM2 MQS;N41/3 |
NB | A 000 540 46 05 |
| 945 | FUSE BOX FUSE AND RELAY MODULE, REAR N10/2 |
001 | A 211 545 05 01 |
| 945 | FUSE LINK 25A Replaced by: N 000000 004207 |
NB | N 072581 000307 |
| 945 | FUSE LINK C-25 |
NB | N 000000 004207 |
| 946 | CONTACT SPRING FUSE AND RELAY MODULE, REAR 1.0-2.5 MM2 SPT;N10/2 |
NB | A 004 545 52 26 |
| 947 | FUSE BOX FUSE AND RELAY MODULE, REAR N10/2 |
001 | A 211 545 05 01 |
| 947 | FUSE LINK 25A Replaced by: N 000000 004207 |
NB | N 072581 000307 |
| 947 | FUSE LINK C-25 |
NB | N 000000 004207 |
| 948 | CONTACT SPRING FUSE AND RELAY MODULE, REAR 1.0-2.5 MM2 SPT;N10/2 |
NB | A 004 545 52 26 |
| 949 | PIN BUSHING HOUSING CONTROL UNIT FOR REAR SEATS 14-PIN SLK2.8;N25/6 |
001 | A 220 545 99 28 |
| 950 | FEMALE CONTACT CONTROL UNIT FOR REAR SEATS 0.75-1.0 MM2 SLK2.8;N25/6 |
NB | A 013 545 15 26 |
| 950 | FEMALE CONTACT CONTROL UNIT FOR REAR SEATS 1.5-2.5 MM2 SLK2.8;N25/6 |
NB | A 013 545 16 26 |
| 950 | FEMALE CONTACT CONTROL UNIT FOR REAR SEATS 4.0 MM2 SLK2.8;N25/6 |
NB | A 011 545 07 26 |
| 951 | PIN BUSHING HOUSING CONTROL UNIT FOR REAR SEATS 14-PIN SLK2.8;N25/6 |
001 | A 220 545 37 28 |
| 952 | FEMALE CONTACT CONTROL UNIT FOR REAR SEATS 0.75-1.0 MM2 SLK2.8;N25/6 |
NB | A 013 545 15 26 |
| 952 | FEMALE CONTACT CONTROL UNIT FOR REAR SEATS 1.5-2.5 MM2 SLK2.8;N25/6 |
NB | A 013 545 16 26 |
| 953 | CLUTCH CONTROL UNIT FOR REAR SEATS 20 PIN MQS;N25/6 |
001 | A 220 545 19 28 |
| 954 | FEMALE CONTACT CONTROL UNIT FOR REAR SEATS 0.25-0.5 MM2 MQS;N25/6 |
NB | A 016 545 41 26 |
| 955 | PIN BUSHING HOUSING KEYLESS-GO CONTROL MODULE 32-PIN MQS;N69/5 |
001 | A 002 545 05 40 |
| 955 | COVER KEYLESS-GO CONTROL MODULE 32-PIN MQS;N69/5 |
001 | A 005 545 28 30 |
| 955 | COVER KEYLESS-GO CONTROL MODULE MQS;TO A 005 545 28 30 |
001 | A 000 545 91 03 |
| 956 | CLUTCH KEYLESS-GO CONTROL MODULE 8-PIN MQS;N69/5 |
001 | A 002 540 76 81 |
| 957 | FEMALE CONTACT KEYLESS-GO CONTROL MODULE 0.25-0.5 MM2 MQS;N69/5 |
NB | A 016 545 41 26 |
| 957 | ELECTRICAL CABLE KEYLESS-GO CONTROL MODULE 0.75 MM2 MQS;N69/5 |
NB | A 000 540 46 05 |
| 958 | HOUSING KEYLESS-GO CONTROL MODULE 10-PIN SLK2.8;N69/5 |
001 | A 038 545 76 28 |
| 959 | FEMALE CONTACT KEYLESS-GO CONTROL MODULE 1.5-2.5 MM2 SLK2.8;N69/5 |
NB | A 013 545 16 26 |
| 960 | FUSE BOX COOL BOX N10/2 |
001 | A 211 545 13 01 |
| 961 | CONTACT SPRING COOL BOX 1.0-2.5 MM2 SPT;N10/2 |
NB | A 004 545 52 26 |
| 962 | FEMALE CONNECTOR, ELETR. CONTROL UNIT MULTI-CONTOUR BACKREST 6-PIN MQS;N32/20,N32/21 |
002 | A 038 545 71 28 |
| 963 | FEMALE CONTACT CONTROL UNIT MULTI-CONTOUR BACKREST 0.25-0.5 MM2 MQS;N32/20,N32/21 |
NB | A 016 545 41 26 |
| 963 | ELECTRICAL CABLE CONTROL UNIT MULTI-CONTOUR BACKREST 0.75 MM2 MQS;N32/20,N32/21 |
NB | A 000 540 46 05 |
| 974 | CLUTCH ON-BOARD ELEC. SUPPLY CONTROL MODULE 16-PIN MQS, JPT |
NB | A 002 540 55 81 |
| 976 | ELECTRICAL CABLE ON-BOARD ELEC. SUPPLY CONTROL MODULE 0.75 MM2 MQS |
NB | A 000 540 46 05 |
| 978 | PIN BUSHING HOUSING SATELLITE RADIO USA CONTROL UNIT 2-PIN MOST;N87/5 |
001 | A 002 545 90 40 |
| 978 | PLUG HOUSING SATELLITE RADIO RECEIVER 4-PIN MQS;N87/5 |
001 | A 002 545 84 40 |
| 978 | HOUSING SATELLITE RADIO RECEIVER 6-PIN MQS, MOST;N87/5 |
001 | A 000 545 84 30 |
| 979 | FEMALE CONTACT SATELLITE RADIO RECEIVER 0.25-0.5 MM2 MQS;N87/5 |
NB | A 016 545 41 26 |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy