PNEUMATIC SUSPENSION & STABILIZATION ON REAR AXLE
| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | SUPPORT AIR SPRING BELLOWS,LEFT ONLY REPLACEABLE BY PAIRS |
001 | A 655 328 08 41 |
| 005 | SUPPORT AIR SPRING BELLOWS,RIGHT ONLY REPLACEABLE BY PAIRS |
001 | A 655 328 09 41 |
| 008 | PLATE AIR-SPRING-BELLOWS SUPPORT TO REAR AXLE |
001 | A 655 325 00 31 |
| 008 | PLATE AIR-SPRING-BELLOWS SUPPORT TO REAR AXLE |
001 | A 655 325 01 31 |
| 011 | SCREW Replaced by: A 007 990 75 01 |
- | N 000960 024070 |
| 011 | SCREW AIR-SPRING-BELLOWS SUPPORT TO REAR AXLE |
008 | A 007 990 75 01 |
| 017 | SPHERICAL WASHER AIR-SPRING-BELLOWS SUPPORT TO REAR AXLE |
008 | A 620 325 00 70 |
| 020 | NUT AIR-SPRING-BELLOWS SUPPORT TO REAR AXLE |
008 | N 913004 024004 |
| 023 | PLATE FOR HSK ALL-WHEEL DRIVE VEHICLES AND ENGINE OM 442,BEARING BRACKET FOR INTERMEDIATE LEVER MOUNTED ON CAB PIVOT BEARING Replaced by: A 655 320 17 35 |
- | A 655 320 01 35 |
| 023 | PLATE REAR AXLE,FRONT |
002 | A 655 320 17 35 |
| 023 | PLATE FOR HSK ALL-WHEEL DRIVE VEHICLES AND ENGINE OM 442,BEARING BRACKET FOR INTERMEDIATE LEVER MOUNTED ON CAB PIVOT BEARING Replaced by: A 655 320 18 35 |
- | A 655 320 02 35 |
| 023 | PLATE REAR AXLE,REAR |
002 | A 655 320 18 35 |
| 026 | SPACER TUBE Replaced by: A 658 325 02 53 |
- | A 658 325 00 53 |
| 026 | SPACER TUBE PLATE TO CENTRAL BEARING |
004 | A 658 325 02 53 |
| 029 | SCREW PLATE TO CENTRAL BEARING |
004 | N 000960 018133 |
| 029 | SCREW FRONT PLATE TO SIDE MEMBER |
004 | N 000961 012151 |
| 032 | NUT PLATE TO CENTRAL BEARING |
004 | N 913004 018004 |
| 032 | HEXAGON NUT FRONT PLATE TO SIDE MEMBER |
004 | N 910113 012002 |
| 035 | PISTON PNEUMATIC SUSPENSION |
004 | A 387 320 08 18 |
| 038 | SUPPORTING RING Replaced by: A 652 328 00 09 |
- | A 652 328 09 09 |
| 038 | SUPPORTING RING REAR AXLE PNEUMATIC SUSPENSION |
004 | A 652 328 00 09 |
| 039 | SHIM PNEUMATIC SUSPENSION |
004 | A 652 320 02 56 |
| 041 | SCREW Replaced by: N 308676 016020 |
- | N 000961 016075 |
| 041 | HEXAGON HEAD BOLT PISTON TO AIR-SPRING-BELLOWS SUPPORT |
004 | N 308676 016020 |
| 044 | RUBBER BUFFER (RUBBER STOP),EMERGENCY RUNNING |
004 | A 360 328 00 39 |
| 047 | AIR SPRING BELLOWS REAR AXLE PNEUMATIC SUSPENSION |
004 | A 387 328 00 01 |
| 047 | AIR SPRING BELLOWS REAR AXLE PNEUMATIC SUSPENSION |
004 | A 387 328 01 01 |
| 050 | UNION SCREW Replaced by: A 000 997 37 34 |
- | A 000 997 08 34 |
| 050 | UNION SCREW AIR SPRING BELLOWS,CONNECTION: "10",M 16 |
004 | A 000 997 37 34 |
| 053 | CONTROL ARM ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH INTERNALLY MOUNTED BEARING BRACKET FOR INTERMEDIATE LEVER Replaced by: A 658 350 02 05 |
- | A 656 350 00 05 |
| 056 | BOOT WISHBONE CONTROL ARM ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH EXTERNALLY MOUNTED BEARING BRACKET FOR INTERMEDIATE LEVER |
001 | A 656 352 00 97 |
| 059 | CLAMP WISHBONE CONTROL ARM ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH EXTERNALLY MOUNTED BEARING BRACKET FOR INTERMEDIATE LEVER |
001 | A 000 995 39 10 |
| 062 | SCREW WISHBONE CONTROL ARM |
001 | A 000 990 09 19 |
| 065 | PLUG WISHBONE CONTROL ARM ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH EXTERNALLY MOUNTED BEARING BRACKET FOR INTERMEDIATE LEVER |
001 | A 652 997 00 86 |
| 068 | REPAIR KIT CENTRAL JOINT;WITH BALL PIVOT TO 656 350 00 05 ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH EXTERNALLY MOUNTED BEARING BRACKET FOR INTERMEDIATE LEVER |
001 | A 000 350 15 05 |
| 068 | REPAIR KIT CENTRAL JOINT;WITH BALL PIVOT TO 658 350 02 05 ALL VEHICLES WITH LOWER MOUNTED RADIATOR MOUNT |
001 | A 000 350 17 05 |
| 071 | REPAIR KIT WITH BALL PIVOT TO 656 350 00 05 ALL NATURALLY ASPIRATED AND TURBOCHARGED ENGINES WITHOUT INTERCOOLER WITH EXTERNALLY MOUNTED BEARING BRACKET FOR INTERMEDIATE LEVER |
002 | A 000 350 14 05 |
| 071 | REPAIR KIT WITH BALL PIVOT TO 658 350 02 05 ALL VEHICLES WITH LOWER MOUNTED RADIATOR MOUNT |
002 | A 000 350 18 05 |
| 074 | SCREW TRIANGULAR CONTROL ARM TO FRAME |
004 | N 000961 020025 |
| 075 | WASHER TRIANGULAR CONTROL ARM TO FRAME |
004 | A 652 990 01 40 |
| 082 | CONTROL ARM Replaced by: A 655 350 03 06 |
- | A 620 350 01 06 |
| 082 | CONTROL ARM BOTTOM |
002 | A 655 350 03 06 |
| 083 | BOOT | 008 | A 000 338 17 97 |
| 084 | REPAIR KIT TO 620 350 01 06 |
004 | A 000 350 02 13 |
| 084 | REPAIR KIT TO 655 350 03 06 |
004 | A 000 350 06 13 |
| 086 | SCREW Replaced by: N 308765 020012 |
- | N 000960 020032 |
| 086 | HEXAGON HEAD BOLT CONTROL ARM TO REAR AXLE |
004 | N 308765 020012 |
| 089 | SCREW CONTROL ARM TO CENTRAL BEARING |
004 | N 000960 020086 |
| 095 | NUT Replaced by: N 913004 020003 |
- | N 913004 020004 |
| 095 | NUT LOWER CONTROL ARM |
008 | N 913004 020003 |
| 098 | SPACER WASHER AS REQUIRED 0.50 MM |
001 | A 393 328 01 52 |
| 098 | SPACER WASHER AS REQUIRED 2.00 MM |
001 | A 393 328 03 52 |
| 098 | WASHER AS REQUIRED 3.00 MM |
001 | N 000125 021006 |
| 101 | BRACKET LINK VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY |
004 | A 383 326 09 40 |
| 104 | SCREW Replaced by: N 308676 018001 |
- | N 000961 018041 |
| 104 | HEXAGON HEAD BOLT BRACKET TO SIDE MEMBER VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY |
008 | N 308676 018001 |
| 107 | NUT BRACKET TO SIDE MEMBER VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY |
008 | N 913004 018004 |
| 116 | ROD TORSION BAR TO BRACKET VALID FOR NATURALLY ASPIRATED AND TURBOCHARGED ENGINES (V-ENGINE) ATTENTION: WHEN PLACING ORDERS, PLEASE QUOTE VEHICLE IDENT NO. ONLY IF FRAME MOUNTED CABLE HARNESS IS REQUIRED AS AN ASSEMBLY |
002 | A 658 320 02 89 |
| 155 | RUBBER MOUNTING TORSION BAR TO REAR AXLE VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 655 326 04 81 |
| 179 | BEARING BRACKET VEHICLES WITH PARALLEL FRAME Replaced by: A 658 326 08 63 |
- | A 658 326 05 63 |
| 179 | BEARING BRACKET LINK VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 658 326 08 63 |
| 182 | SCREW BEARING BRACKET TO SIDE MEMBER VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | N 000960 018133 |
| 185 | WASHER BEARING BRACKET TO SIDE MEMBER VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | A 655 990 00 40 |
| 188 | NUT BEARING BRACKET TO SIDE MEMBER VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
008 | N 913004 018004 |
| 191 | ROD TORSION BAR TO BEARING BRACKET VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 655 320 02 89 |
| 194 | RUBBER MOUNTING TORSION BAR TO BEARING BRACKET VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 655 326 03 81 |
| 197 | SCREW ROD TO BEARING BRACKET VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM FOR FAN DIAMETER: 720 MM |
002 | N 000961 014141 |
| 197 | HEXAGON HEAD BOLT ROD TO BEARING BRACKET VEHICLES WITH EXPANDING FRAME |
002 | N 308676 016020 |
| 200 | SPACER WASHER Replaced by: A 658 323 01 52 |
- | A 620 323 00 52 |
| 200 | SPACER WASHER ROD TO BEARING BRACKET VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM FOR FAN DIAMETER: 720 MM |
002 | A 658 323 01 52 |
| 200 | SPACER WASHER ROD TO BEARING BRACKET VEHICLES WITH EXPANDING FRAME |
002 | A 658 323 00 52 |
| 203 | TORSION BAR REAR AXLE VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
001 | A 658 326 04 65 |
| 203 | TORSION BAR REAR AXLE VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
001 | A 658 326 05 65 |
| 209 | RUBBER MOUNTING ROD TO TORSION BAR VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 653 326 04 81 |
| 215 | STEP BEARING TORSION BAR TO REAR AXLE VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | A 655 326 00 64 |
| 218 | SCREW Replaced by: N 308765 016011 |
- | N 000960 016277 |
| 218 | HEXAGON HEAD BOLT ROD TO TORSION BAR M 16X110 VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | N 308765 016011 |
| 218 | HEXAGON HEAD BOLT TORSION BAR TO REAR AXLE M 16X110 |
004 | N 308765 016011 |
| 221 | NUT Replaced by: N 910113 016001 |
- | N 913004 016005 |
| 221 | HEXAGON NUT ROD TO TORSION BAR VALID FOR SPECIAL VEHICLES ONLY BORE THREADED HOLES IN CAB FLOOR TO 6.5MM |
002 | N 910113 016001 |
| 221 | HEXAGON NUT TORSION BAR TO REAR AXLE |
004 | N 910113 016001 |
| 257 | SHOCK ABSORBER REAR AXLE |
004 | A 004 326 64 00 |
| 257 | SHOCK ABSORBER Replaced by: A 004 326 64 00 |
- | A 004 326 65 00 |
| 260 | BUSHING TO 004 326 65 00 |
008 | A 000 323 52 50 |
| 263 | RUBBER BUFFER TO 004 326 64 00 |
008 | A 000 320 01 44 |
| 263 | RUBBER BUFFER Replaced by: A 000 323 31 44 |
- | A 000 323 30 44 |
| 263 | RUBBER BUFFER TO 004 326 63 00,65 00 NORMAL COURSE OF REPAIR Replaced by: A 000 323 80 85 |
008 | A 000 323 31 44 |
| 263 | RUBBER MOUNTING TO 004 326 63 00,65 00 |
008 | A 000 323 80 85 |
| 266 | BRACKET SHOCK ABSORBER,TOP |
004 | A 387 320 02 43 |
| 272 | BRACKET SHOCK ABSORBER,BOTTOM |
004 | A 395 323 01 40 |
| 278 | SHIM SHOCK ABSORBER,TOP |
002 | A 648 312 00 84 |
| 281 | SCREW BRACKET TO SIDE MEMBER |
016 | N 000961 012179 |
| 293 | SCREW BRACKET TO AIR SPRING BELLOWS SUPPORT |
004 | N 000960 020130 |
| 296 | HEXAGON NUT BRACKET TO SIDE MEMBER |
016 | N 910113 012002 |
| 299 | NUT BRACKET TO AIR SPRING BELLOWS SUPPORT |
004 | N 913004 020003 |
| 302 | SCREW SHOCK ABSORBER TO TOP BRACKET |
004 | N 000960 016105 |
| 308 | SCREW Replaced by: N 000960 016250 |
- | N 000960 016164 |
| 308 | SCREW SHOCK ABSORBER TO BOTTOM BRACKET |
004 | N 000960 016250 |
| 314 | NUT Replaced by: N 910113 016002 |
- | N 913004 016004 |
| 314 | HEXAGON NUT SHOCK ABSORBER TO BRACKET |
008 | N 910113 016002 |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy