| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | CABLE HARNESS ENGINE CABLE HARNESS,E/CLS-CLASS 30 039709 EXCEPT FOR CODE 809 ALSO INSTALLED FROM ENGINE 30 039710 WITH CODE 808 |
001 | A 210 540 30 06 |
| 005 | CABLE HARNESS ENGINE CABLE HARNESS,E/CLS-CLASS 30 039709 EXCEPT FOR CODE 809 ALSO INSTALLED FROM ENGINE 30 039710 WITH CODE 808 |
001 | A 210 540 31 06 |
| 005 | CABLE HARNESS ENGINE CABLE HARNESS,E/CLS-CLASS 30 039710 EXCEPT FOR CODE 808 ALSO INSTALLED UP TO ENGINE 30 039709 WITH CODE 809 UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 210 540 75 06 |
| 005 | CABLE HARNESS ENGINE CABLE HARNESS,E/CLS-CLASS FROM MODEL YEAR 2000 - CODE 800 UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 210 540 92 06 |
| 014 | CABLE HARNESS ENGINE CABLE HARNESS,E/CLS-CLASS FROM MODEL YEAR 2001 - CODE 801 UP TO THE END OF MODEL YEAR 2001 - CODE 801 |
001 | A 210 440 14 06 |
| 014 | CABLE HARNESS ENGINE CABLE HARNESS,E/CLS-CLASS FROM MODEL YEAR 2002 - CODE 802 |
001 | A 210 440 03 10 |
| 020 | PIN BUSHING HOUSING INTAKE MANIFOLD UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 140 545 35 28 |
| 020 | PIN BUSHING HOUSING INJECTION VALVE UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
008 | A 140 545 35 28 |
| 025 | PLUG INTAKE MANIFOLD FROM MODEL YEAR 2001 - CODE 801 |
001 | A 203 545 05 28 |
| 025 | PLUG INJECTION VALVE FROM MODEL YEAR 2001 - CODE 801 |
008 | A 203 545 05 28 |
| 030 | PIN BUSHING HOUSING IGNITION COIL UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
008 | A 210 540 80 81 |
| 030 | PIN BUSHING HOUSING CAMSHAFT POSITION SENDER UNIT |
001 | A 203 545 30 28 |
| 030 | PIN BUSHING HOUSING IGNITION COIL FROM MODEL YEAR 2001 - CODE 801 |
008 | A 203 545 30 28 |
| 040 | PIN BUSHING HOUSING PRESSURE CONVERTER UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 140 545 47 28 |
| 045 | PIN BUSHING HOUSING PRESSURE CONVERTER FROM MODEL YEAR 2001 - CODE 801 |
001 | A 203 545 34 28 |
| 050 | RECEPTACLE HOUSING INTAKE MANIFOLD PRESSURE SENSOR UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 005 545 66 26 |
| 055 | CLUTCH INTAKE MANIFOLD PRESSURE SENSOR FROM MODEL YEAR 2001 - CODE 801 |
001 | A 210 540 21 81 |
| 070 | CONTACT SPRING Replaced by: A 000 540 27 05 |
- | A 011 545 77 26 |
| 070 | ELECTRICAL CABLE REPAIR SOLUTION CONTACTING 1.0 MM2 CONNECTORS MUST ALSO BE ORDERED IN ACCORDANCE WITH THE TOTAL LINE CROSS-SECTION TO BE CONNECTED.REFER TO WIS FOR REPAIR INSTR. SOLDERED CONN.SLE.A 001 546 99 41 GREEN 0,7 - 2,4 MM2 A 002 546 00 41 RED 2,0 - 4,0 MM2 A 002 546 01 41 BLUE 3,5 - 8,0 MM2 A 002 546 11 41 YELLOW 7,5 - 12,0 MM2 BUTT JOINT A 002 546 13 41 0,5 MM2 A 002 546 14 41 0,8 MM2 A 002 546 15 41 1,3 MM2 A 002 546 16 41 2,0 MM2 |
NB | A 000 540 27 05 |
| 070 | CONTACT SPRING Replaced by: A 000 540 28 05 |
- | A 011 545 76 26 |
| 070 | ELECTRICAL CABLE REPAIR SOLUTION CONTACTING 2.5 MM2 CONNECTORS MUST ALSO BE ORDERED IN ACCORDANCE WITH THE TOTAL LINE CROSS-SECTION TO BE CONNECTED.REFER TO WIS FOR REPAIR INSTR. SOLDERED CONN.SLE.A 001 546 99 41 GREEN 0,7 - 2,4 MM2 A 002 546 00 41 RED 2,0 - 4,0 MM2 A 002 546 01 41 BLUE 3,5 - 8,0 MM2 A 002 546 11 41 YELLOW 7,5 - 12,0 MM2 BUTT JOINT A 002 546 13 41 0,5 MM2 A 002 546 14 41 0,8 MM2 A 002 546 15 41 1,3 MM2 A 002 546 16 41 2,0 MM2 |
NB | A 000 540 28 05 |
| 075 | PLUG ENGINE CONTROL MODULE FROM MODEL YEAR 2001 - CODE 801 |
001 | A 220 545 94 28 |
| 080 | PIN BUSHING HOUSING KNOCK SENSOR UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
002 | A 014 545 93 28 |
| 083 | PLUG KNOCK SENSOR FROM MODEL YEAR 2001 - CODE 801 |
002 | A 203 545 39 28 |
| 090 | CONTACT SPRING 0.5-1.0 MM2 |
NB | A 011 545 81 26 |
| 100 | PIN BUSHING HOUSING FINAL CONTROL ELEMENT IDLING-SPEED CONTROL UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 140 540 33 81 |
| 110 | ROUND PIN BUSHING 1.0 MM2 |
NB | A 003 545 48 26 |
| 113 | CLUTCH FINAL CONTROL ELEMENT IDLING-SPEED CONTROL FROM MODEL YEAR 2001 - CODE 801 |
001 | A 210 540 36 81 |
| 116 | FEMALE CONTACT Replaced by: A 000 540 26 05 |
- | A 013 545 46 26 |
| 116 | ELECTRICAL CABLE REPAIR SOLUTION CONTACTING 0.75 MM2 CONNECTORS MUST ALSO BE ORDERED IN ACCORDANCE WITH THE TOTAL LINE CROSS-SECTION TO BE CONNECTED.REFER TO WIS FOR REPAIR INSTR. SOLDERED CONN.SLE.A 001 546 99 41 GREEN 0,7 - 2,4 MM2 A 002 546 00 41 RED 2,0 - 4,0 MM2 A 002 546 01 41 BLUE 3,5 - 8,0 MM2 A 002 546 11 41 YELLOW 7,5 - 12,0 MM2 BUTT JOINT A 002 546 13 41 0,5 MM2 A 002 546 14 41 0,8 MM2 A 002 546 15 41 1,3 MM2 A 002 546 16 41 2,0 MM2 |
NB | A 000 540 26 05 |
| 120 | PIN BUSHING HOUSING CRANKSHAFT POSITION SENDER UNIT 30 039709 EXCEPT FOR CODE 809 ALSO INSTALLED FROM ENGINE 30 039710 WITH CODE 808 |
001 | A 168 545 27 28 |
| 120 | PIN BUSHING HOUSING CRANKSHAFT POSITION SENDER UNIT |
001 | A 168 545 27 28 |
| 120 | PIN BUSHING HOUSING CRANKSHAFT POSITION SENDER UNIT 30 039710 EXCEPT FOR CODE 808 ALSO INSTALLED UP TO ENGINE 30 039709 WITH CODE 809 |
001 | A 168 545 30 28 |
| 120 | PIN BUSHING HOUSING ALTERNATOR FROM MODEL YEAR 2002 - CODE 802 |
001 | A 168 545 30 28 |
| 130 | FEMALE CONTACT 0.5-1.0 MM2 |
NB | A 013 545 15 26 |
| 140 | PIN BUSHING HOUSING REFRIGERANT TEMPERATURE SENSOR |
001 | A 210 540 20 81 |
| 140 | PIN BUSHING HOUSING CLUTCH VACUUM VALVE AIR PUMP |
001 | A 210 540 20 81 |
| 140 | PIN BUSHING HOUSING REFRIGERANT COMPRESSOR |
001 | A 210 540 20 81 |
| 150 | CLUTCH OIL SENSOR |
001 | A 210 540 21 81 |
| 180 | FEMALE CONTACT Replaced by: A 000 540 25 05 |
- | A 008 545 63 26 |
| 180 | ELECTRICAL CABLE REPAIR SOLUTION CONTACTING 0.5 MM2 CONNECTORS MUST ALSO BE ORDERED IN ACCORDANCE WITH THE TOTAL LINE CROSS-SECTION TO BE CONNECTED.REFER TO WIS FOR REPAIR INSTR. SOLDERED CONN.SLE.A 001 546 99 41 GREEN 0,7 - 2,4 MM2 A 002 546 00 41 RED 2,0 - 4,0 MM2 A 002 546 01 41 BLUE 3,5 - 8,0 MM2 A 002 546 11 41 YELLOW 7,5 - 12,0 MM2 BUTT JOINT A 002 546 13 41 0,5 MM2 A 002 546 14 41 0,8 MM2 A 002 546 15 41 1,3 MM2 A 002 546 16 41 2,0 MM2 |
NB | A 000 540 25 05 |
| 190 | PIN BUSHING HOUSING CO-DRIVER'S AIR BAG 3-POLIG UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 030 545 02 28 |
| 200 | FEMALE CONTACT Replaced by: A 000 540 46 05 |
- | A 008 545 55 26 |
| 200 | ELECTRICAL CABLE REPAIR SOLUTION CONTACTING 0.75 MM2 CONNECTORS MUST ALSO BE ORDERED IN ACCORDANCE WITH THE TOTAL LINE CROSS-SECTION TO BE CONNECTED.REFER TO WIS FOR REPAIR INSTR. SOLDERED CONN.SLE.A 001 546 99 41 GREEN 0,7 - 2,4 MM2 A 002 546 00 41 RED 2,0 - 4,0 MM2 A 002 546 01 41 BLUE 3,5 - 8,0 MM2 A 002 546 11 41 YELLOW 7,5 - 12,0 MM2 BUTT JOINT A 002 546 13 41 0,5 MM2 A 002 546 14 41 0,8 MM2 A 002 546 15 41 1,3 MM2 A 002 546 16 41 2,0 MM2 |
NB | A 000 540 46 05 |
| 203 | PIN BUSHING HOUSING CO-DRIVER'S AIR BAG 7-POLIG |
001 | A 210 545 81 28 |
| 209 | SHELL ENGINE CONTROL MODULE UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 210 545 14 30 |
| 212 | PIN BUSHING HOUSING ENGINE CONTROL MODULE UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 002 545 27 40 |
| 215 | PIN BUSHING HOUSING ENGINE CONTROL MODULE UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 002 545 28 40 |
| 220 | PLUG HOUSING ENGINE CONTROL MODULE UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 001 545 87 40 |
| 230 | PLUG HOUSING ENGINE CONTROL MODULE UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 001 545 88 40 |
| 240 | CAP CONTROL-UNIT PLUG-CONNECTION UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 001 545 13 03 |
| 250 | SHELL CONTROL-UNIT PLUG-CONNECTION UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 210 545 05 30 |
| 253 | PLUG HOUSING ENGINE CONTROL MODULE FROM MODEL YEAR 2001 - CODE 801 |
001 | A 168 545 08 28 |
| 280 | CONTACT SPRING 0.5-1.0 MM2 |
NB | A 011 545 81 26 |
| 280 | FLAT PIN BUSHING 1.5-2.5 MM2 |
NB | A 004 545 53 26 |
| 280 | FEMALE CONTACT 4.0 MM2 |
NB | A 004 545 00 26 |
| 286 | PLUG HOUSING ENGINE CONTROL MODULE FROM MODEL YEAR 2001 - CODE 801 |
001 | A 168 545 07 28 |
| 290 | PIN BUSHING HOUSING AIR-MASS SENSOR |
001 | A 220 545 46 28 |
| 305 | BLIND PLUG | NB | A 000 545 79 80 |
| 310 | BOOT TO 220 545 46 28 |
001 | A 000 545 25 46 |
| 310 | COVER CAP TO 203 545 30 28 |
001 | A 000 545 25 84 |
| 320 | FEMALE CONTACT Replaced by: A 000 540 38 05 |
- | A 009 545 81 26 |
| 320 | ELECTRICAL CABLE REPAIR SOLUTION CONTACTING 0.75 MM2 CONNECTORS MUST ALSO BE ORDERED IN ACCORDANCE WITH THE TOTAL LINE CROSS-SECTION TO BE CONNECTED.REFER TO WIS FOR REPAIR INSTR. SOLDERED CONN.SLE.A 001 546 99 41 GREEN 0,7 - 2,4 MM2 A 002 546 00 41 RED 2,0 - 4,0 MM2 A 002 546 01 41 BLUE 3,5 - 8,0 MM2 A 002 546 11 41 YELLOW 7,5 - 12,0 MM2 BUTT JOINT A 002 546 13 41 0,5 MM2 A 002 546 14 41 0,8 MM2 A 002 546 15 41 1,3 MM2 A 002 546 16 41 2,0 MM2 |
NB | A 000 540 38 05 |
| 330 | PIN BUSHING HOUSING AIR INJECTION |
001 | A 011 545 71 28 |
| 340 | FEMALE CONTACT 4 MM2 |
NB | A 003 545 26 26 |
| 412 | PLUG HOUSING ENGINE PLUG CONNECTION FROM MODEL YEAR 2001 - CODE 801 |
001 | A 017 545 08 28 |
| 421 | CONTACT PIN 0.25 - 2.5 MM2 |
NB | A 016 545 14 28 |
| 533 | CABLE GUIDE | 001 | A 000 546 03 80 |
| 540 | GROMMET | 001 | A 210 997 30 81 |
| 545 | SOLDERING END CUPS GREEN 0.7-2.4 MM2 |
NB | A 001 546 99 41 |
| 545 | SOLDERING END CUPS RED 2.0-4.0 MM2 |
NB | A 002 546 00 41 |
| 545 | SOLDERING END CUPS BLUE 3.5-8.0 MM2 |
NB | A 002 546 01 41 |
| 545 | SOLDERING END CUPS YELLOW 7.5-12.0 MM2 |
NB | A 002 546 11 41 |
| 546 | CABLE CONNECTOR 0.5 MM2 |
NB | A 002 546 13 41 |
| 546 | CABLE CONNECTOR 0.8 MM2 |
NB | A 002 546 14 41 |
| 546 | BUTT CONNECTOR 1.3 MM2 |
NB | A 002 546 15 41 |
| 546 | BUTT CONNECTOR 2.0 MM2 |
NB | A 002 546 16 41 |
| 550 | PLUG CLUTCH INTAKE MANIFOLD PRESSURE SENSOR UP TO THE END OF MODEL YEAR 2000 - CODE 800 |
001 | A 210 545 97 28 |
| 560 | BOOT CLUTCH VACUUM VALVE AIR PUMP |
001 | A 001 546 24 35 |
| 580 | CLAMP CABLE RAIL |
001 | A 001 995 85 01 |
| 590 | TAPPING SCREW | 001 | N 007976 004302 |
| 600 | CABLE TIE | NB | A 001 997 83 90 |
| 610 | BRACKET AT TIMING CASE COVER |
NB | A 000 995 44 14 |
| 620 | BRACKET ELECTRONIC GAS ACTUATOR FROM MODEL YEAR 2001 - CODE 801 |
001 | A 220 546 18 43 |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy