| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | CYLINDER Replaced by: A 000 553 44 05 |
- | A 000 553 28 05 |
| 005 | CYLINDER ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
- | A 000 553 44 05 |
| 005 | CYLINDER Replaced by: A 001 553 36 05 |
- | A 000 553 70 05 |
| 005 | CYLINDER HYDRAULIC SYSTEM USED FOR CAB TILTING WEBER ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | A 001 553 36 05 |
| 005 | CYLINDER NOT FOR USE WITH MERCEDES-BENZ CAB FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA Replaced by: A 000 553 75 05 |
- | A 000 553 46 05 |
| 005 | CYLINDER Replaced by: A 001 553 46 05 |
- | A 000 553 75 05 |
| 005 | CYLINDER HYDRAULIC SYSTEM USED FOR CAB TILTING WEBER NOT FOR USE WITH MERCEDES-BENZ CAB IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | A 001 553 46 05 |
| 005 | CYLINDER ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
- | A 000 553 43 05 |
| 005 | CYLINDER HYDRAULIC SYSTEM USED FOR CAB TILTING POWER PACKER ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB ELIMINATED - NO LONGER REQUIRED |
001 | A 000 553 71 05 |
| 005 | CYLINDER Replaced by: A 001 553 36 05 |
- | A 000 553 68 05 |
| 005 | CYLINDER HYDRAULIC SYSTEM USED FOR CAB TILTING POWER PACKER ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB 395.315,325,415,425 FROM CHASSIS 4 423554;395.316,326 FROM CHASSIS 4 426857;395.344,354,444,454 FROM CHASSIS 4 408960 EXCEPT FOR SEE FOOTN.29 AS WELL AS ON VEHICLES FOR ALGERIA |
001 | A 001 553 36 05 |
| 006 | SEAL RING PISTON 25X3.5 MM,WEBER,TO 000 553 44 05 |
001 | A 004 997 45 48 |
| 007 | SEAL RING PISTON WEBER,TO 000 553 37 05,000 553 46 05 |
001 | A 000 553 55 60 |
| 007 | SEAL RING PISTON WEBER,TO 000 553 44 05 |
001 | A 000 553 57 60 |
| 007 | SEAL RING 29X3 MM,WEBER TO 000 553 44 05 |
001 | A 004 997 46 48 |
| 007 | SEAL RING PISTON WEBER TO 000 553 32 05,000 553 37 05, |
001 | A 000 553 56 60 |
| 008 | SEAL RING 20X26X5 MM,WEBER TO 000 553 28 05, |
001 | A 000 553 42 60 |
| 009 | SEAL RING 20X28X7 MM,WEBER,TO 000 553 28 05, |
001 | A 000 553 43 60 |
| 009 | BOOT GUIDE WEBER TO 000 553 32 05,000 553 37 05, |
001 | A 000 553 01 96 |
| 009 | BOOT WEBER,TO 000 553 32 05,000 553 37 05, |
001 | A 000 553 02 96 |
| 010 | SEAL RING GUIDE WEBER,TO 000 553 32 05,000 553 37 05, |
001 | A 004 997 37 48 |
| 011 | SEAL CONE HYDRAULIC LINE WEBER TO 000 553 28 05,000 553 41 05, |
002 | A 000 990 81 67 |
| 012 | SCREW HYDRAULIC LINE WEBER,TO 000 553 28 05,000 553 44 05, |
002 | A 000 997 06 34 |
| 013 | NUT HIGH PRESSURE HOSE TO HYDRAULIC CYLINDER WEBER,TO 000 553 28 05,000 553 46 05, |
002 | A 000 990 77 54 |
| 014 | SEAL RING VALVE WEBER,TO 000 553 28 05,000 553 44 05 |
001 | A 000 553 53 60 |
| 015 | GUIDE WEBER,TO 000 553 70 05 ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | A 000 553 04 28 |
| 015 | GUIDE WEBER,TO 000 553 37 05,000 553 75 05 NOT FOR USE WITH MERCEDES-BENZ CAB IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | A 000 553 18 28 |
| 015 | GUIDE WEBER,TO 001 553 36 05 NOT FOR USE WITH MERCEDES-BENZ CAB IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | A 000 553 14 28 |
| 015 | GUIDE WEBER,TO 001 553 46 05 NOT FOR USE WITH MERCEDES-BENZ CAB FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
001 | A 000 553 15 28 |
| 016 | SEAL RING VALVE BORE LOCKING WEBER,TO 000 553 28 05,000 553 32 05 |
001 | N 007603 014405 |
| 017 | SCREW PLUG Replaced by: N 000908 014009 |
- | N 000908 014001 |
| 017 | SCREW PLUG VALVE BORE LOCKING WEBER,TO 000 553 28 05,000 553 32 05, |
001 | N 000908 014009 |
| 018 | GLAND Replaced by: A 001 990 16 67 |
- | N 003861 006007 |
| 018 | SEAL CONE HIGH PRESSURE HOSE TO HYDRAULIC CYLINDER WEBER,TO 000 553 38 05,000 553 32 05, |
002 | A 001 990 16 67 |
| 019 | FITTING HIGH PRESSURE HOSE WEBER TO 000 553 28 05,000 553 32 05, |
001 | A 000 553 00 68 |
| REPAIR KIT Replaced by: A 000 550 00 07 |
- | A 000 586 10 55 | |
| 020 | REPAIR KIT HYDRAULIC CYLINDER WEBER,TO 000 553 32 05 |
001 | A 000 550 00 07 |
| 020 | REPAIR KIT Replaced by: A 000 550 01 07 |
- | A 000 586 17 55 |
| 020 | GASKET KIT Replaced by: A 000 550 04 07 |
- | A 000 550 01 07 |
| 020 | GASKET KIT HYDRAULIC CYLINDER WEBER,TO 000 53 37 05,000 553 75 05 NOT FOR USE WITH MERCEDES-BENZ CAB |
001 | A 000 550 04 07 |
| 020 | GASKET KIT HYDRAULIC CYLINDER WEBER,TO 001 553 36 05 IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | A 000 550 14 07 |
| 020 | REPAIR KIT HYDRAULIC CYLINDER WEBER,TO 000 553 28 05 |
001 | A 000 586 18 55 |
| 020 | REPAIR KIT Replaced by: A 000 550 02 07 |
- | A 000 586 33 55 |
| 020 | REPAIR KIT HYDRAULIC CYLINDER POWER-PACKER,TO 000 553 43 05 ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
001 | A 000 550 02 07 |
| 020 | GASKET KIT HYDRAULIC CYLINDER POWER-PACKER,TO 000 553 68 05 ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB 395.315,325,415,425 FROM CHASSIS 4 423554;395.316,326 FROM CHASSIS 4 426857;395.344,354,444,454 FROM CHASSIS 4 408960 EXCEPT FOR SEE FOOTN.29 AS WELL AS ON VEHICLES FOR ALGERIA |
001 | A 000 550 02 35 |
| 020 | REPAIR KIT Replaced by: A 000 550 15 35 |
- | A 000 586 48 55 |
| 020 | REPAIR KIT Replaced by: A 001 553 49 05 |
- | A 000 550 15 35 |
| 020 | GASKET KIT HYDRAULIC CYLINDER WEBER,TO 000 553 44 05,000 553 70 05 ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB |
001 | A 001 553 49 05 |
| 020 | GASKET KIT HYDRAULIC CYLINDER WEBER,TO 001 553 36 05 ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | A 000 550 14 07 |
| 020 | GASKET KIT HYDRAULIC CYLINDER WEBER,TO 001 553 46 05 NOT FOR USE WITH MERCEDES-BENZ CAB FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
001 | A 000 550 15 07 |
| 030 | BEARING BRACKET HYDRAULIC CYLINDER ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB |
001 | A 387 553 03 38 |
| 030 | BEARING BRACKET FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 810566 Replaced by: A 387 553 10 38 |
- | A 387 553 06 38 |
| 030 | BEARING BRACKET HYDRAULIC CYLINDER NOT FOR USE WITH MERCEDES-BENZ CAB |
001 | A 387 553 10 38 |
| 045 | SCREW BEARING BRACKET TO FRAME M 16X1.5X25 NOT FOR USE WITH MERCEDES-BENZ CAB |
004 | N 000961 016112 |
| 045 | SCREW BEARING BRACKET TO FRAME 14X1.5X22 MM ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB |
001 | N 000961 014074 |
| 045 | SCREW Replaced by: A 942 990 13 04 |
- | N 000961 014063 |
| 045 | SCREW BEARING BRACKET TO FRAME 14X1.5X40 MM ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB |
001 | A 942 990 13 04 |
| 050 | LOCK WASHER BEARING BRACKET TO FRAME ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB |
001 | N 912004 014100 |
| 050 | LOCK WASHER BEARING BRACKET TO FRAME NOT FOR USE WITH MERCEDES-BENZ CAB |
004 | N 912004 016100 |
| 051 | NUT Replaced by: N 910113 014000 |
- | N 913004 014005 |
| 051 | NUT BEARING BRACKET TO FRAME |
001 | N 910113 014000 |
| 053 | SEAL RING HYDRAULIC CYLINDER TO BEARING BRACKET FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
002 | A 363 553 00 60 |
| 056 | WASHER HYDRAULIC CYLINDER TO BEARING BRACKET FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
001 | A 363 553 00 76 |
| 059 | WASHER Replaced by: N 000125 025008 |
- | N 000125 025005 |
| 059 | WASHER HYDRAULIC CYLINDER TO BEARING BRACKET FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
001 | N 000125 025008 |
| 060 | BUSHING HYDRAULIC CYLINDER TO BEARING BRACKET |
001 | A 620 891 04 17 |
| 070 | WASHER HYDRAULIC CYLINDER TO BEARING BRACKET |
001 | A 620 553 01 76 |
| 085 | COTTER PIN HYDRAULIC CYLINDER TO BEARING BRACKET |
001 | N 000094 006327 |
| 090 | WASHER HYDRAULIC CYLINDER TO CAB |
001 | A 387 553 02 76 |
| 095 | WASHER HYDRAULIC CYLINDER TO CAB |
001 | A 387 553 00 76 |
| 097 | BUSHING HYDRAULIC CYLINDER TO SWIVEL ARM NOT FOR USE WITH MERCEDES-BENZ CAB |
002 | A 620 891 00 17 |
| 100 | WASHER HYDRAULIC CYLINDER TO CAB |
001 | A 387 553 03 76 |
| 105 | NUT Replaced by: N 910113 016002 |
- | N 913004 016004 |
| 105 | NUT HYDRAULIC CYLINDER TO CAB |
001 | N 910113 016002 |
| 110 | PIN HYDRAULIC CYLINDER TO SWIVEL ARM NOT FOR USE WITH MERCEDES-BENZ CAB FLANGE MOUNTING:NECKED-DOWN BOLT;INTERMEDIATE BEARING HOUSING DIA./WIDTH:194/64 MM 372 4 405997 ALSO INSTALLED ON 4 404885 442,452 4 405202 ALSO INSTALLED ON 4 399276 472 4 406810 ALSO INSTALLED ON 344,354,444,454 4 408960 EXCEPT FOR AS WELL AS ON VEHICLES FOR ALGERIA |
001 | N 001434 020005 |
| 110 | PIN HYDRAULIC CYLINDER TO SWIVEL ARM NOT FOR USE WITH MERCEDES-BENZ CAB IF REQUIRED,ORDER LOCK RINGS ADDITIONALLY |
001 | N 001444 020201 |
| SEAL RING THE OLD PART MUST NO LONGER BE INSTALLED THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: A 620 891 00 17 |
- | A 363 553 01 60 | |
| 120 | SEAL RING THE OLD PART MUST NO LONGER BE INSTALLED THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: A 620 891 00 17 |
- | A 387 553 00 60 |
| 120 | SEAL RING THE OLD PART MUST NO LONGER BE INSTALLED THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: A 620 891 00 17 |
- | A 387 553 01 60 |
| 120 | WASHER THE OLD PART MUST NO LONGER BE INSTALLED THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: A 620 891 00 17 |
- | A 387 892 00 82 |
| 120 | SPACER RING THE OLD PART MUST NO LONGER BE INSTALLED THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Replaced by: A 620 891 00 17 |
- | A 387 553 01 51 |
| 140 | COTTER PIN HYDRAULIC CYLINDER TO SWIVEL ARM NOT FOR USE WITH MERCEDES-BENZ CAB |
001 | N 000094 005016 |
| 145 | PUMP FOR USE WITH SHORT MERCEDES-BENZ CAB Replaced by: A 000 553 37 01 |
- | A 000 553 23 01 |
| 145 | PUMP FOR USE WITH SHORT MERCEDES-BENZ CAB Replaced by: A 000 553 39 01 |
- | A 000 553 37 01 |
| 145 | PUMP FOR USE WITH SHORT MERCEDES-BENZ CAB Replaced by: A 000 553 79 01 |
- | A 000 553 39 01 |
| 145 | PUMP (HAND PUMP) WEBER |
001 | A 000 553 79 01 |
| 145 | PUMP Replaced by: A 000 553 65 01 |
- | A 000 553 54 01 |
| 145 | PUMP (HAND PUMP) POWER PACKER ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB 395.315,325,415,425 FROM CHASSIS 4 423554;395.316,326 FROM CHASSIS 4 426857;395.344,354,444,454 FROM CHASSIS 4 408960 EXCEPT FOR SEE FOOTN.29 AS WELL AS ON VEHICLES FOR ALGERIA |
001 | A 000 553 65 01 |
| 150 | FITTING WEBER,TO 000 553 23 01,000 553 37 01 |
002 | A 000 990 92 68 |
| 152 | SEAL RING WEBER,TO 000 553 37 01 |
002 | A 004 997 15 48 |
| 154 | BOOT WEBER TO 000 553 2301,000 553 37 01, |
001 | A 000 553 00 96 |
| 154 | SEAL RING WEBER,TO 000 553 27 01 |
001 | A 000 553 48 60 |
| 154 | WASHER WEBER,TO 000 550 27 01 |
001 | A 002 990 26 40 |
| 156 | SEAL RING WEBER,TO 000 553 23 01,000 553 37 01 |
002 | A 000 553 45 60 |
| 158 | LEVER WEBER TO 000 553 23 01,000 553 37 01 |
001 | A 000 550 01 13 |
| 165 | PISTON WEBER,TO 000 553 37 01 |
001 | A 000 553 11 90 |
| 165 | PISTON WEBER,TO 000 553 39 01 |
001 | A 000 553 17 90 |
| 165 | PISTON WEBER,TO 000 553 27 01 |
001 | A 000 553 13 90 |
| 165 | PISTON WEBER,TO 000 553 40 01 |
001 | A 000 553 19 90 |
| 165 | PISTON WEBER,TO 000 553 79 01 |
001 | A 000 553 18 90 |
| 165 | PISTON POWER-PACKER,TO 000 553 32 01 |
001 | A 000 553 12 90 |
| 170 | VALVE Replaced by: A 000 550 15 55 |
- | A 000 550 00 55 |
| 170 | VALVE WEBER,TO 000 553 37 01 |
001 | A 000 550 15 55 |
| 170 | VALVE WEBER,TO 000 553 39 01 |
001 | A 000 550 28 55 |
| 170 | VALVE WEBER,TO 000 553 79 01 |
001 | A 000 550 34 55 |
| 170 | VALVE WEBER,TO 000 553 27 01 |
001 | A 000 550 01 55 |
| 170 | VALVE WEBER,TO 000 553 40 01 |
001 | A 000 550 29 55 |
| 174 | SEAL RING WEBER,TO 000 553 23 01,000 553 27 01, |
001 | A 001 997 88 48 |
| 174 | SEAL RING WEBER,TO 000 553 23 01,000 553 37 01 |
001 | A 001 997 89 48 |
| 174 | SEAL RING WEBER,TO 000 553 23 01,000 553 37 01 |
001 | A 001 997 87 48 |
| 175 | SCREW Replaced by: N 000000 000190 |
- | N 000912 008111 |
| 175 | SCREW BOX COVER WEBER,TO 000 553 79 01 |
004 | N 000000 000190 |
| 176 | SEAL RING Replaced by: A 008 997 86 45 |
- | A 001 997 90 48 |
| 176 | SEAL RING WEBER,TO 000 553 23 01,000 553 37 01 |
001 | A 008 997 86 45 |
| 178 | SEAL RING WEBER,TO 000 553 23 01 |
001 | A 000 553 47 60 |
| 180 | LOCK WASHER BOX COVER WEBER,TO 000 553 79 01, |
004 | N 912004 008102 |
| 185 | GASKET WEBER,TO 000 553 23 01,000553 37 04 |
001 | A 000 553 02 80 |
| 185 | GASKET WEBER,TO 000 553 27 01 |
001 | A 000 553 01 80 |
| 190 | FILTER WEBER,TO 000 553 79 01 |
001 | A 000 553 04 03 |
| 192 | FILTER POWER-PACKER,TO 000 553 32 01 |
002 | A 000 553 08 03 |
| 198 | BALL PISTON POWER-PACKER,TO 000 553 32 01 |
002 | A 001 981 37 85 |
| 198 | BALL VALVE POWER-PACKER,TO 000 553 32 01 |
001 | A 001 981 38 85 |
| 215 | FITTED WASHER WEBER,TO 000 553 79 01, |
001 | N 000988 020011 |
| 220 | LOCK RING WEBER,TO 000 553 79 01, |
001 | N 000471 020001 |
| 222 | CLAMPING SLEEVE 4X32 MM,WEBER,TO 000 553 23 01, |
001 | N 001481 004023 |
| 222 | CLAMPING SLEEVE 4X28MM,WEBER,TO 000 553 37 01 |
001 | N 001481 004015 |
| 224 | CLAMPING SLEEVE 4X12 MM,WEBER,TO 000 553 23 01, |
002 | N 001481 004001 |
| 225 | SCREW OIL REFILLING WEBER,TO 000 553 79 01, |
001 | A 000 990 16 10 |
| 225 | SCREW OIL REFILLING POWER,PACKER,TO 000 553 32 01 |
001 | A 000 553 01 71 |
| 227 | SEAL RING WEBER,TO 000 553 23 01,000 553 37 01 |
001 | N 007603 018106 |
| 229 | SNAP RING WEBER,TO 000 553 27 01 |
001 | N 009045 016001 |
| 229 | SNAP RING WEBER,TO 000 553 23 01,000 553 37 01 |
001 | N 009045 014001 |
| 229 | SNAP RING WEBER,TO 000 553 27 01 |
001 | N 009045 020001 |
| 230 | SCREW Replaced by: A 000 990 13 10 |
- | A 000 990 04 10 |
| 230 | SCREW Replaced by: A 000 990 16 10 |
- | A 000 990 13 10 |
| 230 | GASKET KIT HAND PUMP WEBER,TO 000 553 39 01 |
001 | A 000 550 25 83 |
| 230 | GASKET KIT HAND PUMP WEBER,TO 000 553 40 01 |
001 | A 000 550 28 83 |
| 230 | GASKET KIT HAND PUMP WEBER,TO 000 553 79 01 |
001 | A 000 550 27 83 |
| 230 | REPAIR KIT VALVE POWER-PACKER TO 000 553 32 /U |
001 | A 000 586 34 55 |
| 230 | REPAIR KIT PISTON POWER-PACKER TO 000 553 32 01 |
001 | A 000 586 35 55 |
| 230 | REPAIR KIT VALVE POWER-PACKER,TO 000 553 54 01 |
001 | A 000 550 02 55 |
| 230 | REPAIR KIT PISTON POWER-PACKER,TO 000 553 54 01 |
001 | A 000 550 02 75 |
| 250 | BRACKET FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO.4 301480 Replaced by: A 387 553 11 40 |
- | A 387 553 03 40 |
| 250 | BRACKET HAND PUMP ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB |
001 | A 387 553 11 40 |
| 250 | BRACKET HAND PUMP NOT FOR USE WITH MERCEDES-BENZ CAB |
001 | A 387 553 12 40 |
| 265 | SCREW Replaced by: N 304017 010002 |
- | N 000933 010129 |
| 265 | SCREW HAND PUMP TO BRACKET M 10X30 ONLY ON VEHICLES HAVING MERCEDES-BENZ CAB |
004 | N 304017 010002 |
| 265 | SCREW HAND PUMP TO BRACKET M 10X35 NOT FOR USE WITH MERCEDES-BENZ CAB |
004 | N 000933 010145 |
| 270 | WASHER Replaced by: N 000125 010532 |
- | N 000125 010518 |
| 270 | WASHER HAND PUMP TO BRACKET |
004 | N 000125 010532 |
| 275 | NUT Replaced by: N 910113 010000 |
- | N 913004 010008 |
| 275 | NUT HAND PUMP TO BRACKET |
004 | N 910113 010000 |
| 280 | SCREW BRACKET TO FRAME M 14X1.5X40 NOT FOR USE WITH MERCEDES-BENZ CAB |
002 | N 000961 014028 |
| 285 | NUT BRACKET TO FRAME NOT FOR USE WITH MERCEDES-BENZ CAB |
003 | N 910113 014001 |
| 310 | LINE FROM HAND PUMP TO HIGH PRESSURE HOSE LENGTH AVAILABLE 3000 MM |
NB | A 000 429 00 01 |
| 315 | UNION NUT HYDRAULIC LINE |
NB | N 915017 006100 |
| 320 | GLAND Replaced by: A 001 990 16 67 |
- | N 003861 006007 |
| 320 | SEAL CONE HYDRAULIC LINE |
NB | A 001 990 16 67 |
| 335 | HOSE Replaced by: A 387 553 01 82 |
- | A 387 553 02 82 |
| 335 | HOSE FROM HYDRAULIC LINE TO CYLINDER |
002 | A 387 553 01 82 |
| 345 | T-FITTING HAND PUMP HOSE & TRANSMISSION SHIFTING ROD TO CYLINDER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 NOT FOR USE WITH MERCEDES-BENZ CAB UP TO IDENT NO.4 367398 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 178251 |
001 | N 003953 006101 |
| 345 | T-FITTING HAND PUMP HOSE & TRANSMISSION SHIFTING ROD TO CYLINDER NOT FOR USE WITH MERCEDES-BENZ CAB UP TO IDENT NO.4 421917,FOR USE WITH MERCEDES-BENZ CAB EXHAUST STOCK OF OLD PART NUMBERS FIRST FROM IDENT NO. 4 247126-4 972492 |
001 | A 001 990 01 70 |
| 355 | FITTING Replaced by: A 001 990 98 71 |
- | N 003952 006102 |
| 355 | ELBOW FITTING HIGH PRESSURE HOSE TO HYDRAULIC CYLINDER NOT FOR USE WITH MERCEDES-BENZ CAB,FROM IDENT NO.4 421918 |
002 | A 001 990 98 71 |
| 355 | ELBOW FITTING HIGH PRESSURE HOSE TO HYDRAULIC CYLINDER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 NOT FOR USE WITH MERCEDES-BENZ CAB UP TO IDENT NO.4 367398 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 178251 |
001 | A 001 990 98 71 |
| 395 | BRACKET LINE TO SIDE MEMBER |
002 | A 316 429 00 40 |
| 397 | BRACKET LINE TO SIDE MEMBER |
002 | A 352 428 16 40 |
| 425 | SCREW OIL DELIVERY LINE TO BRACKET M 6X16 |
003 | N 000933 006102 |
| 432 | WASHER OIL DELIVERY LINE TO BRACKET |
003 | N 000125 006421 |
| 435 | NUT Replaced by: N 913004 006001 |
- | N 913004 006002 |
| 435 | NUT OIL DELIVERY LINE TO BRACKET |
003 | N 913004 006001 |
| 470 | CLAMP OIL DELIVERY LINE TO BRACKET |
006 | A 360 995 01 01 |
| 475 | SCREW Replaced by: N 304017 008021 |
- | N 000933 008147 |
| 475 | SCREW BRACKET TO FRAME 8X20 MM |
001 | N 304017 008021 |
| 475 | SCREW Replaced by: N 304017 008034 |
- | N 000933 008153 |
| 475 | SCREW BRACKET TO FRAME 8X25 MM |
001 | N 304017 008034 |
| 475 | SCREW Replaced by: N 304017 008027 |
- | N 000933 008152 |
| 475 | SCREW BRACKET TO FRAME 8X30 MM |
001 | N 304017 008027 |
| 475 | SCREW Replaced by: N 304017 008018 |
- | N 000933 008150 |
| 475 | SCREW BRACKET TO FRAME 8X35 MM |
001 | N 304017 008018 |
| 485 | NUT Replaced by: N 913004 008001 |
- | N 913004 008004 |
| 485 | NUT BRACKET TO FRAME |
002 | N 913004 008001 |
| 490 | HOSE FROM HYDRAUL.CYLINDER TO TRANSMISSIONSHIFTING-ROD PAWL FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
001 | A 387 553 03 82 |
| 495 | UNION NUT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
002 | N 915017 006100 |
| 500 | GLAND Replaced by: A 001 990 16 67 |
- | N 003861 006007 |
| 500 | SEAL CONE FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
002 | A 001 990 16 67 |
| 505 | FITTING Replaced by: A 001 990 98 71 |
- | N 003952 006102 |
| 505 | ELBOW FITTING HIGH PRESSURE HOSE TO SCREW-IN FITTING FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
001 | A 001 990 98 71 |
| 510 | FITTING HOSE TO TRANSMISSION-SHIFT ROD SHIFTING CYLINDER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
001 | A 002 997 84 72 |
| 515 | SEAL RING Replaced by: N 007603 010110 |
- | N 007603 010103 |
| 515 | SEAL RING HOSE TO TRANSMISSION-SHIFT ROD SHIFTING CYLINDER FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
001 | N 007603 010110 |
| 520 | LOOM TIE HIGH PRESSURE HOSE TO CAB FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
NB | A 001 997 84 90 |
| 540 | BRACKET HIGH PRESSURE HOSE FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
001 | A 387 553 13 40 |
| 550 | SCREW BRACKET TO BUMPER STRUT M10X20 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
001 | N 000933 010128 |
| 560 | NUT Replaced by: N 910113 010000 |
- | N 913004 010008 |
| 560 | NUT BRACKET TO BUMPER STRUT FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
001 | N 910113 010000 |
| 565 | CLAMP HIGH PRESSURE HOSE TO BRACKET FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
003 | N 916016 008200 |
| 570 | SCREW HIGH PRESSURE HOSE TO BRACKET M 6X20 FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
003 | N 000000 001147 |
| 575 | NUT Replaced by: N 913004 006001 |
- | N 913004 006002 |
| 575 | NUT HIGH PRESSURE HOSE TO BRACKET FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. 4 434577 |
003 | N 913004 006001 |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy