| №- | Name | A* | Part number |
|---|---|---|---|
| 005 | DIFFERENTIAL GEAR LESS RING GEAR AND PINION |
001 | A 615 350 26 23 |
| 005 | DIFFERENTIAL GEAR ONLY USE CAST-IRON OR SHEET-IRON BRAKE SHOES AT THE SAME TIME ON ONE AXLE Replaced by: A 615 350 22 23 |
- | A 387 350 21 23 |
| 005 | DIFFERENTIAL GEAR Replaced by: A 615 350 30 23 |
- | A 615 350 22 23 |
| 005 | DIFFERENTIAL GEAR LESS RING GEAR AND PINION |
001 | A 615 350 30 23 |
| 008 | SCREW COVER TO CAST DIFFERENTIAL CASE M 14X85 |
012 | A 005 990 51 04 |
| 008 | SCREW COVER TO STEEL DIFFERENTIAL CASE M 14X100 |
012 | A 005 990 52 04 |
| 011 | DIFFERENTIAL SPIDER DIFFERENTIAL GEAR |
001 | A 617 353 01 20 |
| 011 | DIFFERENTIAL SPIDER DIFFERENTIAL GEAR |
001 | A 615 353 01 20 |
| 014 | SPACER RING DIFFERENTIAL GEAR BEARING |
004 | A 615 353 00 51 |
| 017 | ROLLER DIFFERENTIAL GEAR BEARING |
160 | A 615 981 01 86 |
| 020 | SPACER RING DIFFERENTIAL GEAR BEARING |
004 | A 615 353 02 51 |
| 023 | DIFFERENTIAL PINION DIFFERENTIAL GEAR BEARING |
004 | A 617 353 01 14 |
| 023 | DIFFERENTIAL PINION FIRST EXHAUST STOCK OF OLD PARTS UP TO REAR AXLE N 078315 Replaced by: A 615 353 02 14 |
- | A 615 353 00 14 |
| 023 | DIFFERENTIAL PINION Replaced by: A 615 353 03 14 |
- | A 615 353 02 14 |
| 023 | DIFFERENTIAL PINION DIFFERENTIAL GEAR BEARING 745.800,801 3 224337 745.809,844 3 226570 |
004 | A 615 353 03 14 |
| 026 | THRUST WASHER DIFFERENTIAL GEAR BEARING 1.00 MM |
004 | A 385 353 12 62 |
| 026 | THRUST WASHER DIFFERENTIAL GEAR BEARING 1.00 MM |
004 | A 385 353 37 62 |
| 026 | THRUST WASHER DIFFERENTIAL GEAR BEARING 0.15 MM |
004 | A 615 353 01 62 |
| 026 | THRUST WASHER DIFFERENTIAL GEAR BEARING 2.00 MM 745.800,801 3 224337 745.809,844 3 226570 |
004 | A 615 353 02 62 |
| 029 | SIDE GEAR FIRST EXHAUST STOCK OF OLD PARTS UP TO REAR AXLE N 078315 Replaced by: A 615 353 01 15 |
- | A 617 353 01 15 |
| 029 | SIDE GEAR LEFT AND RIGHT 745.800,801 3 224337 745.809,844 3 226570 |
002 | A 615 353 01 15 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.45 MM -MS- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 22 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.45 MM -ST- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 29 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.45 MM -CU- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 39 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.50 MM -CU- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 40 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.50 MM -MS- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 23 62 |
| 032 | THRUST WASHER Replaced by: A 615 353 04 62 |
- | A 385 353 30 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.50 MM -ST- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 615 353 04 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.55 MM -MS- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 24 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.55 MM -ST- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 31 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.55 MM -CU- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 41 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.60 MM -MS- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 25 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.60 MM -ST- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 32 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.60 MM -CU- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 42 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.65 MM -MS- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 26 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.65 MM -ST- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 33 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.65 MM -CU- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 43 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.70 MM -MS- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 27 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.70 MM -ST- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 34 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.70 MM -CU- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 44 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.80 MM -MS- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 28 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.80 MM -ST- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 35 62 |
| 032 | THRUST WASHER DIFFERENTIAL GEAR;AS REQUIRED 1.80 MM -CU- ONLY INSTALL PARTS MADE OF THE SAME MATERIAL |
002 | A 385 353 45 62 |
| 035 | REPAIR KIT Replaced by: A 385 350 00 40 |
- | A 385 586 00 35 |
| 035 | REPAIR KIT DIFFERENTIAL GEAR |
001 | A 385 350 00 40 |
| 035 | REPAIR KIT DIFFERENTIAL GEAR |
001 | A 615 350 00 40 |
| 038 | SCREW Replaced by: A 385 990 24 01 |
- | A 385 990 21 01 |
| 038 | SCREW RING GEAR TO DIFFERENTIAL CASE |
018 | A 385 990 24 01 |
| 041 | RING GEAR AND PINION DIFFERENTIAL GEAR,RATIO: 43:10 |
001 | A 301 350 22 39 |
| 044 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR,LEFT AND RIGHT |
002 | A 004 981 43 05 |
| 044 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR,LEFT AND RIGHT |
002 | A 004 981 17 05 |
| 044 | ROLLER BEARING Replaced by: A 004 981 43 05 |
- | N 000720 032018 |
| 044 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR,LEFT AND RIGHT |
002 | A 004 981 43 05 |
| 044 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR,LEFT AND RIGHT |
002 | A 005 981 56 05 |
| 044 | TAPERED ROLLER BEARING DIFFERENTIAL GEAR,LEFT AND RIGHT |
002 | A 006 981 00 05 |
| 047 | SCREW COLLAR NO LONGER AVAILABLE INDIVIDUALLY, BUT ONLY IN BRAKE CAMSHAFT REPAIR KIT Replaced by: A 615 353 03 25 |
- | A 385 353 01 25 |
| 047 | SCREW COLLAR DIFFERENTIAL GEAR ADJUSTMENT |
002 | A 615 353 03 25 |
| 050 | LOCK SCREW COLLAR FIRST EXHAUST STOCK OF OLD PARTS UP TO REAR AXLE 3 242579 |
002 | A 346 333 00 73 |
| 050 | LOCK SCREW COLLAR ONLY USE BRAKE DRUMS MADE OF THE SAME MATERIAL PER VEHICLE; SEE SERVICE INFORMATION NO.42/72 |
002 | A 385 353 03 73 |
| 053 | SCREW SCREW COLLAR LOCKING |
002 | N 000933 008005 |
| 056 | SLIDE RING GEAR CHECK |
001 | A 385 353 01 49 |
| 059 | SET SCREW RING GEAR CHECK |
001 | A 385 353 03 76 |
| 062 | NUT RING GEAR CHECK |
001 | N 000439 030202 |
| 065 | SCREW RING GEAR CHECK FIRST EXHAUST STOCK OF OLD PARTS UP TO REAR AXLE 3 242579 |
001 | A 385 337 01 71 |
| 065 | SCREW RING GEAR CHECK ONLY USE BRAKE DRUMS MADE OF THE SAME MATERIAL PER VEHICLE; SEE SERVICE INFORMATION NO.42/72 |
001 | A 385 351 00 71 |
| 068 | NUT RING GEAR CHECK FIRST EXHAUST STOCK OF OLD PARTS UP TO REAR AXLE 3 242579 |
001 | N 080705 014002 |
| 068 | NUT Replaced by: N 304032 010003 |
- | N 000934 010014 |
| 068 | HEXAGON NUT RING GEAR CHECK ONLY USE BRAKE DRUMS MADE OF THE SAME MATERIAL PER VEHICLE; SEE SERVICE INFORMATION NO.42/72 |
001 | N 304032 010003 |
| 071 | CYLINDR. ROLLER BEARING FIRST EXHAUST STOCK OF OLD PARTS UP TO REAR AXLE 3 274069 Replaced by: A 004 981 67 01 |
- | A 003 981 90 01 |
| 071 | CYLINDR. ROLLER BEARING Replaced by: A 007 981 79 01 |
- | A 004 981 67 01 |
| 071 | CYLINDR. ROLLER BEARING Replaced by: A 007 981 79 01 |
- | A 004 981 81 01 |
| 071 | CYLINDR. ROLLER BEARING Replaced by: A 007 981 79 01 |
- | A 004 981 86 01 |
| 071 | CYLINDR. ROLLER BEARING DRIVE SHAFT,FRONT |
001 | A 007 981 79 01 |
| 071 | CYLINDR. ROLLER BEARING DRIVE SHAFT,FRONT |
001 | A 007 981 78 01 |
| 074 | SNAP RING TAPERED ROLLER BEARING TO DRIVE SHAFT |
001 | A 385 994 00 37 |
| 077 | RETAINING RING TAPERED ROLLER BEARING TO DRIVE SHAFT 40X1.75 MM |
001 | N 000471 040002 |
| 077 | SNAP RING TAPERED ROLLER BEARING TO DRIVE SHAFT 40X1.50 MM |
001 | N 912009 040100 |
| 080 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR;AS REQUIRED 0.10 MM |
001 | A 301 353 33 52 |
| 080 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR;AS REQUIRED 0.15 MM |
001 | A 301 353 34 52 |
| 080 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR;AS REQUIRED 0.20 MM |
001 | A 301 353 35 52 |
| 080 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR;AS REQUIRED 0.25 MM |
001 | A 301 353 36 52 |
| 080 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, REAR;AS REQUIRED 0.50 MM |
001 | A 301 353 37 52 |
| 083 | TAPERED ROLLER BEARING DRIVE SHAFT,REAR |
001 | A 006 981 34 05 |
| 083 | TAPERED ROLLER BEARING DRIVE SHAFT,REAR |
001 | A 009 981 69 05 |
| 083 | TAPERED ROLLER BEARING DRIVE SHAFT,REAR |
001 | A 006 981 35 05 |
| 086 | SPACER RING DRIVE SHAFT BEVEL GEAR/CROWN WHEEL 13.5 MM |
001 | A 370 353 00 51 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.60 MM |
001 | A 301 353 89 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.62 MM |
001 | A 301 353 88 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.64 MM |
001 | A 301 353 87 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.66 MM |
001 | A 301 353 86 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.68 MM |
001 | A 301 353 85 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.70 MM |
001 | A 301 353 84 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.72 MM |
001 | A 301 353 83 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.74 MM |
001 | A 301 353 82 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.76 MM |
001 | A 301 353 81 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.78 MM |
001 | A 301 353 80 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.80 MM |
001 | A 301 353 39 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.82 MM |
001 | A 301 353 40 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.84 MM |
001 | A 301 353 41 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.86 MM |
001 | A 301 353 42 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.88 MM |
001 | A 301 353 43 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.90 MM |
001 | A 301 353 44 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.92 MM |
001 | A 301 353 45 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.94 MM |
001 | A 301 353 46 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.96 MM |
001 | A 301 353 47 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 6.98 MM |
001 | A 301 353 48 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.00 MM |
001 | A 301 353 49 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.02 MM |
001 | A 301 353 50 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.04 MM |
001 | A 301 353 51 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.06 MM |
001 | A 301 353 52 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.08 MM |
001 | A 301 353 53 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.10 MM |
001 | A 301 353 54 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.12 MM |
001 | A 301 353 55 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.14 MM |
001 | A 301 353 56 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.16 MM |
001 | A 301 353 57 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.18 MM |
001 | A 301 353 58 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.20 MM |
001 | A 301 353 59 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.22 MM |
001 | A 301 353 60 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.24 MM |
001 | A 301 353 61 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.26 MM |
001 | A 301 353 62 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.28 MM |
001 | A 301 353 63 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.30 MM |
001 | A 301 353 64 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.32 MM |
001 | A 301 353 65 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.34 MM |
001 | A 301 353 66 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.36 MM |
001 | A 301 353 67 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.38 MM |
001 | A 301 353 68 52 |
| 089 | SPACER WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL, FRONT;AS REQUIRED 7.40 MM |
001 | A 301 353 69 52 |
| 092 | TAPERED ROLLER BEARING DRIVE SHAFT,FRONT |
001 | A 006 981 17 05 |
| 092 | TAPERED ROLLER BEARING DRIVE SHAFT,FRONT |
001 | A 006 981 19 05 |
| 092 | TAPERED ROLLER BEARING DRIVE SHAFT,FRONT |
001 | A 011 981 07 05 |
| 095 | THRUST WASHER Replaced by: A 385 353 38 62 |
- | A 317 353 01 62 |
| 095 | THRUST WASHER DRIVE SHAFT BEVEL GEAR/CROWN WHEEL |
001 | A 385 353 38 62 |
| 098 | SCREW COLLAR NO LONGER AVAILABLE INDIVIDUALLY, BUT ONLY IN BRAKE CAMSHAFT REPAIR KIT Replaced by: A 615 353 01 25 |
- | A 385 353 06 25 |
| 098 | SCREW COLLAR DIFFERENTIAL GEAR ADJUSTMENT |
001 | A 615 353 01 25 |
| 101 | LOCK SCREW COLLAR |
001 | A 327 353 03 73 |
| 101 | LOCK SCREW COLLAR |
001 | A 385 353 05 73 |
| 104 | SCREW SCREW COLLAR LOCKING |
001 | N 000933 008005 |
| 107 | FLANGE (COUPLING FLANGE),DIA., 150 MM |
001 | A 385 353 10 45 |
| 110 | SEAL RING Replaced by: A 016 997 66 47 |
- | A 005 997 67 47 |
| 110 | SEAL RING DRIVE SHAFT,INSIDE |
001 | A 016 997 66 47 |
| 110 | SEAL RING Replaced by: A 016 997 67 47 |
- | A 005 997 77 47 |
| 110 | SEALING RING DRIVE SHAFT,OUTSIDE |
001 | A 016 997 67 47 |
| 113 | NUT Replaced by: A 385 351 01 72 |
- | A 385 351 00 72 |
| 113 | NUT COUPLING FLANGE TO DRIVE PINION |
001 | A 385 351 01 72 |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy