LINING AND PANELLING

EPC / Mercedes / Coches de turismo / FG / FG 188.014 / 68 / 040
‹ ›

№- Nombre C* Número de pieza
ANTISQUEAK AT
FRONT, WALL, LATERAL PART BOTTOM, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LE 		002 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 1ST FROM FRONT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		003 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 2ND FROM FRONT, LEFT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 2ND FROM FRONT, RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 3RD FROM FRONT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		002 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 4TH FROM FRONT, LEFT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 4TH FROM FRONT, RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 5TH FROM FRONT, LEFT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 5TH FROM FRONT, RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, 6TH FROM FRONT, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND 		002 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, BELOW DRIVER'S SEAT, FRONT, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNES 		002 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR BELOW DRIVER'S SEAT, REAR, LEFT AND RIGHT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, 		002 A 000 983 30 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, LEFT AND RIGHT OF TOE-BOARD TO DRIVER'S SEAT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKN 		002 A 000 983 30 91
ANTISQUEAK LEFT
AND RIGHT, FROM BELOW DRIVER'S SEAT, FRONT, TO FOLDING SEAT BITUMEN-CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, 		002 A 000 983 30 91
ANTISQUEAK AT
REAR COMPARTMENT FLOOR, BELOW FOLDING SEAT, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, W 		002 A 000 983 29 91
ANTISQUEAK AT
LUGGAGE COMPARTMENT FLOOR ABOVE REAR AXLE, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WI 		002 A 000 983 29 91
ANTISQUEAK AT
LUGGAGE COMPARTMENT FLOOR, FRONT, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND L 		002 A 000 983 29 91
ANTISQUEAK AT
LUGGAGE COMPARTMENT FLOOR, FRONT, CENTER BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 29 91
ANTISQUEAK AT
LUGGAGE COMPARTMENT FLOOR NEXT TO SPARE WHEEL RECESS, LEFT AND RIGHT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE TH 		002 A 000 983 29 91
ANTISQUEAK AT
LUGGAGE COMPARTMENT FLOOR, CENTER BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 29 91
ANTISQUEAK AT
LUGGAGE COMPARTMENT FLOOR, REAR BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 29 91
ANTISQUEAK AT
COVER PLATE, LUGGAGE COMPARTMENT, BEHIND BACKREST OF FOLDING SEAT BITUMEN-CORK FELT 3 MM THICK WHEN ORDERING STATE THICK 		001 A 000 983 29 91
ANTISQUEAK AT
DRIVER'S CAB FLOOR, LEFT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 23 92
ANTISQUEAK AT
DRIVER'S CAB FLOOR, RIGHT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 23 92
ANTISQUEAK AT
SIDE PART, LEFT AND RIGHT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		002 A 000 983 23 92
ANTISQUEAK AT
FLOOR, LEFT AND RIGHT, IN REAR COMPARTMENT WAFFLE FELT 15 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		002 A 000 983 23 92
ANTISQUEAK AT
PROPELLER SHAFT, REAR COMPARTMENT WAFFLE FELT 10 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 22 92
ANTISQUEAK LEFT
AND RIGHT, GLOVE COMPARTMENT BIT. CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		002 A 000 983 30 91
ANTISQUEAK CENTER,
GLOVE COMPARTMENT BIT. CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK HEATING
CHANNEL BIT. CORK FELT 5 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 30 91
ANTISQUEAK, FRONT WALL
BIT. CORK FELT, 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		002 A 000 983 29 91
ANTISQUEAK IN
FRONT OF RADIO FELT, BLACK 6 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 03 92
ANTISQUEAK IN
FRONT OF RADIO IN FRONT OF GLOVE COMPARTMENT FELT, BLACK 6 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 03 92
ANTISQUEAK IN
FRONT OF RADIO BATTERY MOUNTING FELT, BLACK 6 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 03 92
ANTISQUEAK SUPPORTING
FRAME FELT, BLACK 1 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 31 92
ANTISQUEAK CROSS
MEMBER, RIGHT FELT, BLACK 1 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 31 92
ANTISQUEAK CROSS
MEMBER, LEFT FELT, BLACK 1 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 31 92
ANTISQUEAK ON
DEFROSTER NOZZLE, LEFT AND RIGHT FELT, BLACK 2 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		002 A 000 983 30 92
ANTISQUEAK REAR PART, TOP
FELT, BLACK 2 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		003 A 000 983 30 92
ANTISQUEAK LEFT, AT SCOOP
WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 07 92
ANTISQUEAK RIGHT,
AT SCOOP WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 07 92
ANTISQUEAK LEFT,
AT MUDGUARD WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 07 92
ANTISQUEAK RIGHT,
AT MUDGUARD WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 07 92
ANTISQUEAK LEFT,
AT AIR CHANNEL, INTERIOR WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 07 92
ANTISQUEAK RIGHT,
AT AIR CHANNEL, INTERIOR WOOL FELT, GREY, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS, WIDTH AND LENGTH 		001 A 000 983 07 92
ANTISQUEAK, DASHBOARD,
LEFT 		001 A 301 886 80 01 26
ANTISQUEAK, DASHBOARD,
RIGHT 		001 A 301 886 80 02 26
COUNTERSUNK LENS-HD.
SCREW S 3,9X16 DIN 7973 FOR ANTISQUEAK AT DASHBOARD, BOTTOM VERCHROMT, CHROM. -PLATED 		016
COUNTERSUNK WASHER
FOR ANTISQUEAK AT DASHBOARD, BOTTOM VERCHROMT, CHROM. -PLATED 		016 A 000 985 10 62
RUBBER UNDERLAYER,
BLACK, AT SIDE MEMBER, FRONT, LEFT AND RIGHT 		002 A 301 886 82 01 97
RUBBER UNDERLAYER
BLACK, AT FRAME ELONGATION, FRONT 		002 A 301 886 82 02 97
ANTISQUEAK LEFT,
AT AIR CHANNEL, EXTERIOR WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 02 92
ANTISQUEAK RIGHT,
AT AIR CHANNEL, EXTERIOR WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 02 92
ANTISQUEAK CONNECTION
FITTING, LEFT WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 02 92
ANTISQUEAK CONNECTION
FITTING, RIGHT WOOL FELT, BLACK, IMPREGNATED 3 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 02 92
ANTISQUEAK, LATERAL, ROOF
JUTE FELT WITH CREPE PAPER INSERT, 8 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		002 A 000 983 41 92
ANTISQUEAK, LATERAL,
ROOF FRONT, ROOF JUTE FELT WITH CREPE PAPER INSERT, 8 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 41 92
ANTISQUEAK, LATERAL,
ROOF REAR, ROOF JUTE FELT WITH CREPE PAPER INSERT, 8 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 41 92
ANTISQUEAK LEFT,
FLOOR, REAR AXLE WAFFLE FELT, 15 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 23 92
ANTISQUEAK RIGHT,
FLOOR, REAR AXLE WAFFLE FELT, 15 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 23 92
ANTISQUEAK, UPHOLSTERY
FELT, 2-MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 12 92
TRANSMISSION COVER PLATE
BITUMEN FELT, 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
RIGHT
BITUMEN FELT, 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		002 A 000 983 30 91
LEFT
BITUMEN FELT, 5 MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 30 91
FELT MAT,
WAFFLE FELT, BROWN, 10-MM THICK WHEN ORDERING STATE THICKNESS WIDTH AND LENGTH 		001 A 000 983 22 92

LOWER PART, CHROM. -PLATED FOR CARPET AT TRANSMISSION, COVER PLATE 		004 A 000 988 33 79
001
COVER PLATE WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 01 38
002 TENAX LOCK,
UPPER PART, CHROM. -PLATED AT CARPET, REAR AND CENTER FOR CARPET AT TRANSMISSION COVER PLATE 		004 A 000 988 01 79
COUNTERSUNK LENS-HD.
SCREW CHROM. -PLATED S 3,9X19 DIN 7973 FOR CARPET AT TRANSMISSION COVER PLATE 		002
COUNTERSUNK SCREW,
CHROM. -PLATED FOR CARPET AT TRANSMISSION COVER PLATE 		002 A 000 985 06 62
003 CARPET, TRANSMISSION
COVER PLATE, REAR REINFORCEMENT DOME WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 02 38
004 COVER
FOR REFUELLING DEVICE AND REAR AXLE AT LUGGAGE COMPARTMENT FLOOR 		002 A 121 366 80 01 39
005 SEAL
FOR COVER AT LUGGAGE COMPARTMENT FLOOR AND FOR COVER AT REAR AXLE 		002 A 121 366 93 00 11
CYLINDER SCREW
AM 6X12 DIN 84 - 4S FOR COVER AT LUGGAGE COMPARTMENT FLOOR 		006
006 COVER
FOR SHOCK ABSORBER RUBBER BLACK 		004 A 136 984 01 52
COVER AT
LUGGAGE COMPARTMENT FLOOR, REAR, RIGHT FOR LICENCE PLATE LIGHTING RUBBER BLACK 		001 A 136 984 02 52
COVER AT
TRANSMISSION COVER, LEFT RUBBER BLACK 		001 A 136 984 02 52
007 PROTECTIVE PLATE
DASHBOARD, RIGHT REAR EXHAUST PIPE 		001 A 301 886 83 00 60
CYLINDER SCREW
AM 6X18 DIN 84-4 S FOR PROTECTIVE PLATE AT DASHBOARD 		004
LOCK WASHER
B 6 DIN 127 FOR PROTECTIVE PLATE AT DASHBOARD 		004
WASHER
A 6 DIN 9021 FOR PROTECTIVE PLATE AT DASHBOARD 		004
008 PROTECTIVE PLATE
MAIN FLOOR, FRONT, RIGHT ABOVE EXHAUST PIPE 		001 A 301 886 83 00 61
CYLINDER SCREW
AM 6X18 DIN 84 - 4S FOR PROTECTIVE PLATE AT MAIN FLOOR, FRONT 		004
LOCK WASHER
B 6 DIN 127 FOR PROTECTIVE PLATE AT MAIN FLOOR, FRONT 		004
WASHER
A 6 DIN 9021 FOR PROTECTIVE PLATE AT MAIN FLOOR, FRONT 		004
009 PROTECTIVE PLATE
MAIN FLOOR, REAR, RIGHT ABOVE EXHAUST PIPE 		001 A 301 886 83 01 62
CYLINDER SCREW
AM 6X18 DIN 84 - 4S FOR PROTECTIVE PLATE AT MAIN FLOOR, REAR 		010
LOCK WASHER
B 6 DIN 127 FOR PROTECTIVE PLATE AT MAIN FLOOR, REAR 		010
WASHER
A 6 DIN 9021 FOR PROTECTIVE PLATE AT MAIN FLOOR, REAR 		010
010 PROTECTIVE PLATE
IN ENGINE ROOM, RIGHT 		001 A 301 886 80 00 22
HEX. -HD. SCREW
M 6X15 DIN 933-8G FOR PROTECTIVE PLATE AT MAIN FLOOR 		004
LOCK WASHER
B 6 DIN 127 FOR PROTECTIVE PLATE AT MAIN FLOOR 		004
011 COVER, LEFT
FOR DRIVER'S CAB FLOOR WHEN ORDERING STAT COLOUR AND BODY NO. 		001 A 301 886 80 05 40
012 COVER, RIGHT
FOR DRIVER'S CAB FLOOR WHEN ORDERING STAT COLOUR AND BODY NO. 		001 A 301 886 80 06 40
BUTTON
FOR COVER AT DRIVER'S CAB FLOOR 		003 A 000 988 14 80
CYLINDER SCREW
AM 4X25 DIN 84-4S FOR COVER AT DRIVER'S CAB FLOOR 		002
LOCK WASHER
B 4 DIN 127 FOR COVER AT DRIVER'S CAB FLOOR 		002
HEX. NUT
M 4 DIN 934-5 S FOR COVER AT DRIVER'S CAB FLOOR 		002
BUTTON
FOR COVER AT DRIVER'S CAB FLOOR 		001 A 000 988 23 80
CYLINDER SCREW
S 3,5X32 DIN 7971 FOR COVER AT DRIVER'S CAB FLOOR 		002
016 REMOVABLE CARPET, LEFT
BELOW AT DRIVER'S SEAT WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 01 41
017 REMOVABLE CARPET, RIGHT
BELOW AT DRIVER'S SEAT WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 02 41
018 BALL
FOR REMOVABLE CARPET AT REAR COMPARTMENT FLOOR 		004 A 136 988 09 81
BUTTONHEAD SCREW
S 2,9X9,5 DIN 7974 FOR REMOVABLE CARPET AT REAR COMPARTMENT FLOOR 		004
019 CARPET ABOVE
PROPELLER SHAFT PASSAGE AND REAR COMPARTMENT WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 00 41
020 CARPET, LEFT,
VELOUR CARPET FOR SIDE MEMBER WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 01 43
021 CARPET, RIGHT,
VELOUR CARPET FOR SIDE MEMBER WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 02 43
022 CARPET, LEFT,
VELOUR CARPET AT DRIVER'S SEAT SUPPORT, EXTERIOR WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 01 45
023 CARPET, RIGHT,
VELOUR CARPET AT DRIVER'S SEAT SUPPORT, EXTERIOR WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 02 45
024 CARPET
VELOUR CARPET, BETWEEN DRIVER'S SEAT, LEFT AND RIGHT WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 00 45
025 RUBBER COVER, 001 A 301 886 80 00 42
026 BALL, PUSH-BUTTON,
LOWER PART FOR RUBBER COVER AT LUGGAGE COMPARMENT FLOOR 		002 A 136 988 09 81
BUTTONHEAD SCREW
S 2,9X9,5 DIN 7974 FOR PUSH-BUTTON, LOWER PART, AT LUGGAGE COMPARTMENT FLOOR 		002
027 RUBBER MAT, 2 MM
FOR SPARE WHEEL RECESS, BOTTOM 		002 A 301 886 84 01 05
028 RUBBER MAT, 2 MM
FOR SPARE WHEEL RECESS, LATERAL, EXTERIOR 		002 A 301 886 84 02 05
029 RUBBER MAT, 2 MM
FOR SPARE WHEEL RECESS, LATERAL, INTERIOR 		002 A 301 886 84 00 05
030 COVER RAIL,
LEFT, SPARE WHEEL RECESS 850 MM LONG 		001 A 301 886 84 01 21
031 COVER RAIL,
RIGHT, SPARE WHEEL RECESS 850 MM LONG 		001 A 301 886 84 02 21
032 PANEL, LEFT
AT SIDE MEMBER 		001 A 301 886 86 01 28
033 PANE, RIGHT
AT SIDE MEMBER 		001 A 301 886 86 02 28
CYLINDER SCREW
Z 2,9X9,5 DIN 7971 		016
COUNTERSUNK SCREW
S 2,9X9,5 DIN 7972-4 FOR PANEL AT SIDE MEMBER LEFT AND RIGHT TOP 		010
034 WELT
ARTIFICIAL LEATHER WITH PLASTIC INSERT FOR PANEL AT SIDE MEMBER LEFT AND RIGHT TOP WHEN ORDERING STATE COLOUR AND LENGTH 		002 A 000 987 13 30
035 ENTRANCE SILL,
LEFT, DRIVER'S DOOR 1220 MM LONG 		001 A 301 886 86 01 20
036 ENTRANCE SILL,
RIGHT, DRIVER'S DOOR 1220 MM LONG 		001 A 301 886 86 02 20
037 SUPPORTING WELT,
1220-MM LONG RUBBER, BLACK WHEN ORDERING STATE LENGTH 		002 A 000 987 29 30
COUNTERSUNK SCREW
S 2,9X13 DIN 7972 FOR ENTRANCE SILL AT SIDE MEMBER 		012
038 CUP
FOR PEDAL SEAL 		002 A 101 866 87 00 37
040 PROTECTION PLATE, LEFT
AT FRONT WALL 		001 A 301 886 80 01 72
041 PROTECTION PLATE, RIGHT
AT FRONT WALL 		001 A 301 886 80 02 72
SEALING RUBBER,
450-MM LONG WHEN ORDERING STATE LENGTH 		002 A 000 987 40 36
043 PROTECTION PLATE,
BOTTOM, LEFT BETWEEN DRIVER'S DOOR AND FRONT MUDGUARD 		001 A 301 886 80 01 74
044 PROTECTION PLATE,
BOTTOM, RIGHT BETWEEN DRIVER'S DOOR AND FRONT MUDGUARD 		001 A 301 886 80 02 74
INTERM. LAYER,
MOULDING RUBBER FOR PROTECTION PLATE, TOP RESP. BOTTOM AT BODY SIDE MEMBER WHEN ORDERING STATE LENGTH 		004 A 000 989 24 85
045 RUBBER PROFILE,
BLACK, 1220-MM LONG BETWEEN ENGINE HOOD AND DASHBOARD WHEN ORDERING STATE LENGTH 		001 A 000 987 82 35
046 MOUNTING RAIL,
LATERAL, LEFT FOR PANEL 		001 A 101 866 88 01 20
047 MOUNTING RAIL,
LATERAL, RIGHT FOR PANEL 		001 A 101 866 88 02 20
048 PANEL, LATERAL, LEFT
FOR FRONT WALL WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 01 80
049 PANEL, LATERAL, RIGHT
FOR FRONT WALL WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 02 80
PANEL
UPHOLSTERY LEATHER FOR REINFORCEMENT DOME WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 80 02 81
050 COVER
FOR SPARE WHEEL RECESS 		001 A 301 886 90 02 33
051 BUFFER BUTTON, RUBBER
FOR SEAT SPARE WHEEL RECESS 		001 A 000 987 30 40
052 WATER BAFFLE PLATE, LEFT
AT WHEEL HOUSE REAR 		001 A 301 886 93 03 30
053 WATER BAFFLE PLATE, RIGHT
AT WHEEL HOUSE REAR 		001 A 301 886 93 04 30
CYLINDER SCREW
S 4,2X9,5 DIN 7971 FOR WATER BAFFLE PLATE AT WHEEL HOUSE 		008
MOULDING RUBBER
FOR WATER BAFFLE PLATE AT WHEEL HOUSE WHEN ORDERING STATE LENGTH 		004 A 000 989 19 85
060 PANEL, REAR
PART, LATERAL, LEFT FOR LOCKER NEXT TO FOLDING SEAT VELOUR CARPET WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 03 40
062 PANEL, REAR
PART, LATERAL, RIGHT FOR LOCKER NEXT TO FOLDING SEAT VELOUR CARPET WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 04 40
COVER
FOR LOG AT LOCKER UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH 		002 A 000 983 02 84
COVER, TOP,
LEFT AND RIGHT UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH 		002 A 000 983 02 84
COVER
FOR LID, LOCKER UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH 		002 A 000 983 02 84
COVER LEFT AND RIGHT
FOR LOCKER, INTERIOR UPHOLSTERY LEATHER WHEN ORDERING STATE COLOUR, LENGTH, AND WIDTH 		002 A 000 983 02 84
064 HINGE, CHROM. -PLATED
FOR LID NEXT TO FOLDING SEAT 		002 A 301 886 94 00 80
065 LINING
FOR REAR WALL BEHIND FOLDING SEAT, BACKREST VELOUR CARPET WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 94 00 25
073 COVER
FOR COVER PLATE AT LUGGAGE COMPARTMENT REAR FOLDING SEAT BACKREST WHEN ORDERING STATE COLOUR OF COVER AND BODY NO. 		001 A 101 886 90 00 49
HOLLOW RIVET
A 6X8X8 DIN 7331 FOR COVER AT COVER PLATE 		007
080 PANEL, LEFT
FOR REAR SIDE PART, ABOVE LOCKER WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 01 41
081 PANEL, RIGHT
FOR REAR SIDE PART, ABOVE LOCKER WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 02 41
084 BIND. RAIL,
LEFT, CHROM. -PLATED FOR PANEL AT REAR SIDE PART 630 MM LONG 		001 A 301 886 94 01 60
085 BIND, RAIL,
RIGHT, CHROM. -PLATED FOR PANEL AT REAR SIDE PART 630 MM LONG 		001 A 301 886 94 02 60
COUNTERSUNK SCREW
Z 2,9X6,5 DIN 7972 FOR BINDING RAIL AT REAR PILLAR 		014
087 SUPPORTING RAIL
FOR PANEL AT REAR SIDE PART 		002 A 301 886 94 00 60
COUNTERSUNK WOOD SCREW
3X15 DIN 97-4 S FOR SUPPORTING RAIL AT LOCKER 		006
088 CARPET, LEFT
FOR LUGGAGE COMPARTMENT AT WHEEL HOUSE WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 05 40
089 CARPET, RIGHT
FOR LUGGAGE COMPARTMENT AT WHEEL HOUSE WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 06 40
092 CARPET LEFT
IN LUGGAGE COMPARTMENT, REAR SIDE PART, REAR WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 09 40
093 CARPET, RIGHT
IN LUGGAGE COMPARTMENT, REAR SIDE PART, REAR WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 10 40
094 CARPET, LEFT
IN LUGGAGE COMPARTMENT, REAR SIDE PART, FRONT WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 11 40
096 CARPET, RIGHT
IN LUGGAGE COMPARTMENT, REAR SIDE PART, FRONT WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 12 40
099 CARPET
IN LUGGAGE COMPARTMENT FOR REAR WALL WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 07 40
COUNTERSUNK LENS-HD.
SCREW, CHROM. -PL. S 2,9X9,5 DIN 7973 FOR CARPET AT WHEEL HOUSE 		004
COUNTERSUNK WASHER,
CHROM. -PLATED FOR CARPET AT WHEEL HOUSE 		004 A 000 985 09 62
105 CARPET
IN LUGGAGE COMPARTMENT ABOVE REAR AXLE WHEN ORDERING STATE COLOUR AND BODY NO. 		001 A 301 886 90 08 40
106 BALL, CHROM. -PLATED
FOR PUSHBUTTON, LOWER PART, AT LUGGAGE COMPARTMENT FLOOR 		006 A 136 988 09 81
BUTTONHEAD SCREW
S 2,9X9,5 DIN 7974 FOR PUSHBUTTON, LOWER PART, AT LUGGAGE COMPARTMENT FLOOR 		006
111 MOUNTING RAIL, LEFT
FOR DOME MOUNTING 970 MM LG. 		001 A 101 886 95 01 35
112 MOUNTING RAIL, RIGHT
FOR DOME MOUNTING 970 MM LG. 		001 A 101 886 95 02 35
BUTTONHEAD SCREW
A 3,5X10 DIN 7512 FOR MOUNTING RAIL AT ROOF FRAME 		020
120 DOME WITH TIGHTENING BOW
WHEN ORDERING STATE COLOUR AN BODY NO. 		001 A 101 886 90 00 50
121 DOME, SEWN,
WITHOUT TIGHTENING BOW WHEN ORDERING STATE COLOUR AN BODY NO. 		001 A 101 886 90 01 50
122 TIGHTENING BOW 001 A 101 886 96 00 01
123 TIGHTENING BOW 001 A 101 886 96 00 02
124 TIGHTENING BOW 001 A 101 886 96 00 03
125 TIGHTENING BOW 001 A 101 886 96 00 04
126 BOW SHOE 008 A 000 984 04 36
TIN TACKS
14X13 DIN 1157 FOR DOME AT BOW, REAR WALL WINDOW AND ROOF FRAME 		NB
COUNTERSUNK SCREW
B 3X10 DIN 7509-4 S FOR DOME AT BOW, REAR WALL WINDOW AND ROOF FRAME 		008
127 LINING, FRONT, INTERIOR
ABOVE WINDSCREEN AT ROOF FRAME WHEN ORDERING STATE COLOUR OF LINING AND BODY NO. 		001 A 101 886 90 00 56
128 COVER RAIL, LEFT
FOR REAR SIDE PART, LATERAL WHEN ORDERING STATE BODY NO. AND IF POSSIBLE SUBMIT A SAMPLE 		001 A 301 886 90 01 70
129 COVER RAIL, RIGHT
FOR REAR SIDE PART, LATERAL WHEN ORDERING STATE BODY NO. AND IF POSSIBLE SUBMIT A SAMPLE 		001 A 301 886 90 02 70
130 MOUNTING PLATE
FOR COVER RAIL, LATERAL 		002 A 301 367 25 00 18
131 MOUNTING ANGLE
FOR COVER RAIL, LATERAL 		002 A 301 886 97 00 12
COUNTERSUNK WOOD SCREW
2,6X7 DIN 97-4 S FOR MOUNTING PLATE AND MOUNTING ANGLE AT COVER RAIL 		008
COUNTERSUNK SCREW
S 2,9X22 DIN 7972 FOR MOUNTING PLATE AND MOUNTING ANGLE AT COVER RAIL 		002
COUNTERSUNK LENS-HD.
SCREW S 4,8X45 DIN 7973 FOR MOUNTING PLATE AND MOUNTING ANGLE AT COVER RAIL 		002
132 COVER RAIL
FOR REAR WALL, REAR PART WHEN ORDERING STATE BODY NO. AND IF POSSIBLE SUBMIT A SAMPLE 		001 A 301 886 90 00 70
133 MOUNTING ANGLE
FOR COVER RAIL AT REAR WALL 		003 A 301 886 97 00 13
COUNTERSUNK LENS-HD.
SCREW CHROM. -PLATED S 2,9X16 DIN 7973 FOR MOUNTING ANGLE AT REAR WALL 		006
COUNTERSUNK WOOD SCREW
2,6X7 DIN 97-4 S FOR MOUNTING ANGLE AT COVER RAIL 		006
134 MOSS RUBBER
BETWEEN ROOF AND TROUGH WHEN ORDERING STATE LENGTH 		001 A 000 987 05 33
135 TROUGH, FRONT
DELIVERED WITHOUT CHROM. -PLATING MUST BE FITTED PROFIL-NR. 000 985 01 13 		001 A 101 886 98 00 01
MOULDING RUBBER
FOR TROUGH AT FRONT WALL FRAME AND ROOF WHEN ORDERING STATE LENGTH 		002 A 000 989 19 85
COUNTERSUNK SCREW
CHROM. -PL. B 2,6X6 DIN 7509 FOR TROUGH AT FRONT WALL FRAME AND ROOF 		006
136 TROUGH, LATERAL, LEFT
DELIVERED WITHOUT CHROM. -PLATING MUST BE FITTED PROFIL-NR. 000 985 01 13 		001 A 101 886 98 03 01
137 TROUGH, LATERAL, RIGHT
DELIVERED WITHOUT CHROM. -PLATING MUST BE FITTED PROFIL-NR. 000 985 01 13 		001 A 101 886 98 04 01
COUNTERSUNK SCREW
CHROM. -PLATED B 3,5X8 DIN 7509 FOR TROUGH AT ROOF FRAME 		024
138 ORNAMENTAL BAR, LEFT
FOR FRONT WALL, LATERAL DELIVERED WITHOUT CHROM. -PLATING MUST BE FITTED 		001 A 301 886 90 01 83
139 ORNAMENTAL BAR, RIGHT
FOR FRONT WALL, LATERAL DELIVERED WITHOUT CHROM. -PLATING MUST BE FITTED 		001 A 301 886 90 02 83
140 WELT
FOR ORNAMENTAL BAR AT FRONT WALL WHEN ORDERING STATE COLOUR AND LENGTH 		001 A 000 987 02 31
141 WELT
FOR ORNAMENTAL BAR AT FRONT WALL WHEN ORDERING STATE COLOUR AND LENGTH 		001 A 000 987 02 31
142 SLIDE PIECE, LEFT
FOR ORNAMENTAL BAR AT FRONT WALL PROFIL-NR. 000 985 03 36 		001 A 301 886 98 01 17
143 SLIDE PIECE, RIGHT
FOR ORNAMENTAL BAR AT FRONT WALL PROFIL-NR. 000 985 03 36 		001 A 301 886 98 02 17
COUNTERSUNK SCREW
S 3,9X16 DIN 7972 FOR ORNAMENTAL BAR AT FRONT WALL 		004
150 ORNAMENTAL BAR, LEFT
FOR REAR SIDE PART, BOTTOM PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED 		001 A 301 886 90 01 80
151 ORNAMENTAL BAR, RIGHT
FOR REAR SIDE PART, BOTTOM PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED 		001 A 301 886 90 02 80
152 WELT, ARTIFICIAL
LEATHER WITH STRING INSERT FOR ORNAMENTAL BAR, LEFT WHEN ORDERING STATE COLOUR AND LENGTH 		001 A 000 987 02 31
153 WELT, ARTIFICIAL
LEATHER WITH STRING INSERT FOR ORNAMENTAL BAR, RIGHT WHEN ORDERING STATE COLOUR AND LENGTH 		001 A 000 987 02 31
HEX. NUT
M 5 DIN 934-5 S FOR ORNAMENTAL BAR AT REAR SIDE PART 		008
LOCK WASHER
B 5 DIN 127 FOR ORNAMENTAL BAR AT REAR SIDE PART 		008
154 UNDERLAYER
FOR ORNAMENTAL BAR AT REAR SIDE PART 		008 A 000 987 02 41
155 UNDERLAYER
FOR ORNAMENTAL BAR AT REAR SIDE PART 		008 A 000 984 03 55
ORNAMENTAL BAR, LEFT
FOR SIDE PART AT EDGE, REAR PART, TOP PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED 		001 A 101 886 90 01 81
ORNAMENTAL BAR, RIGHT
FOR SIDE PART AT EDGE, REAR PART, TOP PARTS ARE DELIVERED WITHOUT CHROM. -PLATING, MUST BE FITTED 		001 A 101 886 90 02 81
HEX. NUT
M 4 DIN 934-5 S FOR ORNAMENTAL BAR AT REAR SIDE PART 		010
LOCK WASHER
B 4 DIN 127 FOR ORNAMENTAL BAR AT REAR SIDE PART 		010
162 WASHER
FOR ORNAMENTAL BAR AT REAR SIDE PART 		010 A 000 984 03 55
COUNTERSUNK LENS-HD.
SCREW, CHROM. -PLATED 3X20 DIN 95 ST FOR ORNAMENTAL BAR AT REAR WALL 		002
170 LID, LATERAL,
LEFT AND RIGHT WHEN ORDERING STATE COLOUR OF COVER AND BODY NO. 		002 A 301 887 10 01 57
COUNTERSUNK WOOD
SCREW CHROM. -PLATED 3X15 DIN 97 ST FOR LID AT LOCKER AND HINGE 		016
176 ARRESTING LOCK
FOR ARRESTING OF BACKREST OF FOLDING SEAT 		002 A 136 988 00 60
177 BUTTON WITH ESCUTCHEON 002 A 301 369 30 00 51
COUNTERSUNK LENS-HD.
SCREW, CHROM. -PLATED AM 5X25 DIN 91 FOR BUTTON WITH ESCUTCHEON AT SIDE PART 		004
179 COVER PLATE,
CHROM. -PLATED ABOVE ARRESTING LOCK 		002 A 301 887 11 00 29
COUNTERSUNK WOOD SCREW
4X20 DIN 97 ST FOR COVER PLATE AND ARRESTING LOCK AT SIDE PART, LEFT AND RIGHT 		004
Para averiguar dónde comprar el artículo o equivalente, haga clic en el número de pieza.

Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy
Region: EU | GB | USA
------0.073406934738159