| №- | Nazwa | I* | Numer części |
|---|---|---|---|
| ENGINE LESS STARTING MOTOR, FAN,AND INTAKE MUFFLER |
001 | A 108 010 00 00 | |
| ENGINE WHEN USED FOR REAR CARBURETOR,PLUG BORE FOR FUEL RETURN VALVE BY MEANS OF 1 SEAL RING 007603 012100 AND 1 SCREW PLUG 007604 10/50,20/60 031182 12/52,22/62 018342 012101 Zastąpiono przez: A 108 010 20 00 |
- | A 108 010 02 00 | |
| ENGINE LESS STARTING MOTOR, FAN,AND INTAKE MUFFLER FROM ENGINE 005030 ALSO INSTALLED ON 004940-004982 10/50,20/60 031183 12/52,22/62 018343 |
001 | A 108 010 20 00 | |
| SHORT-BLOCK | 001 | A 108 010 00 50 | |
| SHORT-BLOCK WHEN USED FOR REAR CARBURETOR,PLUG BORE FOR FUEL RETURN VALVE BY MEANS OF 1 SEAL RING 007603 012100 AND 1 SCREW PLUG 007604 10/50,20/60 031182 12/52,22/62 018342 012101 Zastąpiono przez: A 108 010 02 50 |
- | A 108 010 01 50 | |
| SHORT-BLOCK Zastąpiono przez: A 108 010 00 50 |
- | A 108 010 02 50 | |
| SHORT-BLOCK | 001 | A 108 010 00 50 | |
| GASKET KIT 10/50,20/60 026487 12/52,22/62 015530 ALTERNATOR ONLY AVAILABLE IN RECONDITIONED VERSION Zastąpiono przez: A 108 586 02 90 |
- | A 108 586 00 90 | |
| GASKET KIT 10/50,20/60 026487 12/52,22/62 015530 ALTERNATOR ONLY AVAILABLE IN RECONDITIONED VERSION Zastąpiono przez: A 180 586 51 90 |
- | A 108 586 02 90 | |
| GASKET KIT Zastąpiono przez: A 180 586 64 90 |
- | A 180 586 51 90 | |
| GASKET KIT ENGINE 10/50,20/60 026488 12/52,22/62 015531 NO LONGER AVAILABLE,INSTEAD:CYLINDER CRANKASE AND CYLINDER HEAD GASKET KIT |
- | A 180 586 64 90 | |
| GASKET KIT 10/50,20/60 026487 12/52,22/62 015530 ALTERNATOR ONLY AVAILABLE IN RECONDITIONED VERSION Zastąpiono przez: A 108 586 03 90 |
- | A 108 586 01 90 | |
| GASKET KIT 10/50,20/60 026487 12/52,22/62 015530 ALTERNATOR ONLY AVAILABLE IN RECONDITIONED VERSION Zastąpiono przez: A 180 586 52 90 |
- | A 108 586 03 90 | |
| GASKET KIT Zastąpiono przez: A 180 586 64 90 |
- | A 180 586 52 90 | |
| GASKET KIT ENGINE 10/50,20/60 026488 12/52,22/62 015531 NO LONGER AVAILABLE,INSTEAD:CYLINDER CRANKASE AND CYLINDER HEAD GASKET KIT |
- | A 180 586 64 90 | |
| 007 | CRANKCASE | 001 | A 108 010 13 08 |
| 012 | SEAL RING | 001 | N 007603 030100 |
| 016 | SCREW PLUG | 001 | N 000906 030003 |
| 021 | PIPE SOCKET | 001 | A 127 200 04 56 |
| CRANKSHAFT BEARING CAP 920 10/50,20/60 046274 924 10/20,20/60 000003 NO LONGER INSTALLED 920,924 10/50,20/60 045247 920,924 12/52,22/62 027987 |
006 | A 108 011 02 11 | |
| 026 | BEARING CAP WITH 114 140 05 01 INTAKE MANIFOLD,REPLACE 115 997 02 72 SCREW FITTING BY 121 997 03 72 920 10/50,20/60 046449 920 12/52,22/62 028545 920 10/50,20/60 046003 920 12/52,22/62 028352 |
006 | A 108 010 00 23 |
| 030 | CYLINDRICAL PIN | 006 | N 000007 010102 |
| 035 | CYLINDRICAL PIN | 006 | N 000007 008101 |
| CRANKSHAFT BEARING CAP NO. 3,LAPPED BEARING 920 10/50,20/60 046274 924 10/20,20/60 000003 NO LONGER INSTALLED 920,924 10/50,20/60 045247 920,924 12/52,22/62 027987 |
001 | A 108 011 01 13 | |
| 039 | BEARING CAP WITH 114 140 05 01 INTAKE MANIFOLD,REPLACE 115 997 02 72 SCREW FITTING BY 121 997 03 72 920 10/50,20/60 046449 920 12/52,22/62 028545 920 10/50,20/60 046003 920 12/52,22/62 028352 |
001 | A 108 010 01 23 |
| CYLINDRICAL PIN NO LONGER AVAILABLE INDIVIDUALLY,2 REPAIR KIT 000 586 85 07 920 10/50,20/60 046004 920 12/52,22/62 028353 |
001 | N 000007 010102 | |
| CYLINDRICAL PIN NO LONGER AVAILABLE INDIVIDUALLY,2 REPAIR KIT 000 586 85 07 920 10/50,20/60 046004 920 12/52,22/62 028353 |
001 | N 000007 008101 | |
| 044 | SCREW | 013 | A 108 011 01 71 |
| 049 | SCREW | 001 | A 108 011 00 71 |
| 054 | WASHER | 014 | A 121 990 28 40 |
| CYLINDRICAL PIN NO LONGER INSTALLED 920,924 10/50,20/60 045247 920,924 12/52,22/62 027987 |
007 | N 000007 010102 | |
| CYLINDRICAL PIN NO LONGER INSTALLED 920,924 10/50,20/60 045247 920,924 12/52,22/62 027987 |
007 | N 000007 008101 | |
| 059 | BEARING | 001 | A 110 052 01 06 |
| 063 | BEARING HOUSING | 001 | A 180 150 01 07 |
| 069 | CYLINDER SIDE COVER | 002 | A 180 015 08 05 |
| 074 | GASKET Zastąpiono przez: A 110 015 01 21 |
- | A 180 015 10 21 |
| 074 | GASKET | 002 | A 110 015 01 21 |
| 080 | SCREW | 009 | A 000 990 30 12 |
| 085 | PIN | 003 | A 180 072 01 81 |
| 089 | WASHER | 012 | N 000125 006407 |
| 094 | DOWEL PIN | 002 | A 180 991 01 60 |
| 100 | PIN | 001 | A 186 991 00 55 |
| 106 | SCREW PLUG Zastąpiono przez: N 007604 014110 |
- | N 007604 014106 |
| 106 | SCREW PLUG WATER DRAIN |
001 | N 007604 014110 |
| 111 | SEAL RING WATER DRAIN |
001 | A 636 997 02 44 |
| 117 | STUD BOLT ENGINE SUPPORT |
008 | N 000939 010011 |
| STUD BOLT 920,924 10/50,20/60 045248 920,924 12/52,22/62 027988 FROM ENGINE 008380 ALSO INSTALLED ON 007210-007444 924 10/50,20/60 000006 924 12/52,22/62 000001 |
002 | N 000939 008007 | |
| 123 | STUD BOLT 920 10/50,20/60 046450 920 12/52,22/62 028546 NO LONGER AVAILABLE INDIVIDUALLY |
002 | N 000939 008145 |
| 128 | SCREW OIL PASSAGE PLUG |
003 | A 000 990 47 12 |
| 134 | PLUG LATERAL OIL BORE |
001 | N 900085 006001 |
| GASKET KIT Zastąpiono przez: A 180 010 81 08 |
- | A 180 010 08 80 | |
| GASKET KIT CYLINDER CRANKCASE |
001 | A 180 010 81 08 | |
| 139 | DOWEL PIN CYLINDER HEAD |
002 | N 900037 010100 |
| 145 | FLANGE REPAIR SIZE |
001 | A 615 011 02 45 |
| DOWEL PIN REPAIR SIZE |
002 | A 180 991 02 60 | |
| 151 | SCREW | 004 | N 000933 010164 |
| 155 | WASHER | 004 | N 000125 010500 |
| 160 | PROTECTIVE PLATE | 001 | A 615 250 51 56 |
| 166 | PROTECTIVE PLATE | 001 | A 110 250 01 56 |
| SPRING WASHER | 001 | N 000137 006204 | |
| 171 | SCREW Zastąpiono przez: N 304017 006018 |
- | N 000933 006103 |
| 171 | SCREW PROTECTIVE PLATE TO INTERMEDIATE FLANGE |
001 | N 304017 006018 |
| 177 | SCREW PROTECTIVE PLATE TO INTERMEDIATE FLANGE |
001 | N 000933 010111 |
| 183 | SPRING WASHER PROTECTIVE PLATE TO INTERMEDIATE FLANGE |
001 | N 000137 010201 |
| 188 | COVER | 001 | A 114 011 00 33 |
| 193 | GASKET | 001 | A 114 011 00 80 |
| 199 | SCREW Zastąpiono przez: N 304017 006018 |
- | N 000933 006103 |
| 199 | SCREW | 004 | N 304017 006018 |
| SCREW Zastąpiono przez: N 304017 008008 |
- | N 000933 008123 | |
| SCREW FOR REFRIGERANT COMPRESSOR STAY BORE |
001 | N 304017 008008 | |
| SEAL RING FOR REFRIGERANT COMPRESSOR STAY BORE |
001 | N 007603 008100 | |
| OIL PAN 10/50,20/60 000890 12/52,22/62 000532 BORE MOUNTING HOLES OF 115 011 00 33 COVER TO 8.4MM DIA. 924 10/50,20/60 000003 Zastąpiono przez: A 114 010 00 13 |
- | A 108 010 05 13 | |
| OIL PAN THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Zastąpiono przez: A 114 010 00 13 |
- | A 108 010 06 13 | |
| OIL PAN THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Zastąpiono przez: A 114 010 00 13 |
- | A 108 010 07 13 | |
| OIL PAN THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Zastąpiono przez: A 108 010 07 13 |
- | A 114 010 00 13 | |
| 206 | OIL PAN 10/50,20/60 000891 12/52,22/62 000533 ELIMINATE 108 053 00 22,INNER VALVE SPRING 924 10/50,20/60 000004 |
001 | A 108 010 07 13 |
| 211 | PIN | 001 | A 186 991 00 55 |
| THREADED INSERT | 002 | N 900195 010109 | |
| 216 | OIL PAN 920 10/50,20/60 031182 920 12/52,22/62 018342 |
001 | A 108 010 02 13 |
| OIL PAN 920 10/50,20/60 046434 920 12/52,22/62 028550 924 10/50,20/60 000003 924 12/52,22/62 000000 Zastąpiono przez: A 110 010 03 13 |
- | A 108 010 03 13 | |
| OIL PAN Zastąpiono przez: A 123 010 00 28 |
- | A 110 010 03 13 | |
| OIL PAN LOWER PART |
001 | A 123 010 00 28 | |
| GASKET 10/50,20/60 000890 12/52,22/62 000532 BORE MOUNTING HOLES OF 115 011 00 33 COVER TO 8.4MM DIA. 924 10/50,20/60 000003 Zastąpiono przez: A 189 014 05 22 |
- | A 189 014 00 22 | |
| 221 | GASKET Zastąpiono przez: A 617 014 01 80 |
- | A 108 014 00 80 |
| 221 | GASKET 10/50,20/60 000891 12/52,22/62 000533 ELIMINATE 108 053 00 22,INNER VALVE SPRING 924 10/50,20/60 000004 |
001 | A 617 014 01 80 |
| 227 | COMBINATION BOLT Zastąpiono przez: A 001 990 93 12 |
- | N 914020 006000 |
| 227 | SCREW | 016 | A 001 990 93 12 |
| SCREW 10/50,20/60 043690 12/52,22/62 026712 INAPPLICABLE TO SWEDEN,SWITZERLAND |
002 | N 000912 006044 | |
| 232 | SCREW 10/50,20/60 043691 12/52,22/62 026713 ONLY FOR SWEDEN,SWITZERLAND |
002 | N 000912 006045 |
| 238 | LOCK WASHER | 002 | N 912004 006102 |
| SPACER TUBE 10/50,20/60 043690 12/52,22/62 026712 INAPPLICABLE TO SWEDEN,SWITZERLAND Zastąpiono przez: A 127 155 01 50 |
- | A 127 155 02 53 | |
| 244 | BUSHING 10/50,20/60 043691 12/52,22/62 026713 ONLY FOR SWEDEN,SWITZERLAND |
002 | A 127 155 01 50 |
| GUIDE TUBE Zastąpiono przez: A 114 018 01 16 |
- | A 108 018 00 16 | |
| 249 | GUIDE TUBE | 001 | A 114 018 01 16 |
| 255 | SCREW PLUG | 001 | A 130 997 00 32 |
| 261 | SEAL RING | 001 | N 915035 000025 |
| OIL DIPSTICK Zastąpiono przez: A 108 010 05 72 |
- | A 108 010 01 72 | |
| OIL DIPSTICK 10/50,20/60 000890 12/52,22/62 000532 BORE MOUNTING HOLES OF 115 011 00 33 COVER TO 8.4MM DIA. 924 10/50,20/60 000003 |
001 | A 108 010 05 72 | |
| 269 | OIL DIPSTICK 10/50,20/60 000891 12/52,22/62 000533 ELIMINATE 108 053 00 22,INNER VALVE SPRING 924 10/50,20/60 000004 |
001 | A 108 010 05 72 |
| 275 | SEAL RING | 001 | A 136 997 00 41 |
| 281 | COMBINATION BOLT Zastąpiono przez: A 001 990 93 12 |
- | N 914020 006000 |
| 281 | SCREW OIL PAN TO CYLINDER CRANKCASE |
018 | A 001 990 93 12 |
| 287 | COMBINATION BOLT OIL PAN TO CYLINDER CRANKCASE |
004 | N 914034 006000 |
| 292 | SCREW Zastąpiono przez: N 000912 008108 |
- | N 000912 008056 |
| 292 | SCREW OIL PAN TO CYLINDER CRANKCASE |
002 | N 000912 008108 |
| 297 | SCREW OIL PAN TO CYLINDER CRANKCASE |
002 | N 000912 008203 |
| 300 | WASHER OIL PAN TO CYLINDER CRANKCASE |
004 | N 000433 008406 |
| CYLINDER HEAD 920 10/50,20/60 046718 920 12/52,22/62 028664 924 10/50,20/60 000005 NO LONGER AVAILABLE Zastąpiono przez: A 108 010 16 20 |
- | A 108 010 06 20 | |
| CYLINDER HEAD Zastąpiono przez: A 108 010 21 20 |
- | A 108 010 16 20 | |
| 306 | CYLINDER HEAD LESS CAMSHAFT BEARINGS, WITH STUDS AND VALVE GUIDES 10/50,20/60 026488 12/52,22/62 015531 924,12/52,22/62 NEW PART NO. FROM SERIES PRODUCTION START |
001 | A 108 010 21 20 |
| 311 | SCREW PLUG | 003 | A 180 997 06 30 |
| 317 | VALVE SEAT RING INTAKE;STANDARD |
006 | A 108 053 00 31 |
| VALVE SEAT RING INTAKE,44 MM |
006 | A 108 053 01 31 | |
| 323 | VALVE SEAT RING EXHAUST,STANDARD 41.10 MM |
006 | A 123 053 01 32 |
| VALVE SEAT RING EXHAUST,REPAIR SIZE 42.30 MM |
006 | A 123 053 03 32 | |
| 327 | WATER DISTRIBUTOR | 003 | A 127 016 08 60 |
| 333 | WATER DISTRIBUTOR | 006 | A 127 016 07 60 |
| 338 | WATER DISTRIBUTOR | 001 | A 127 016 04 60 |
| 344 | CYLINDRICAL PIN CAMSHAFT BEARING TO CYLINDER HEAD |
008 | N 000007 008202 |
| 350 | STUD BOLT CAMSHAFT BEARING TO CYLINDER HEAD |
004 | N 000939 008004 |
| 361 | STUD BOLT THERMOSTAT |
002 | N 000939 008050 |
| 367 | STUD EXHAUST MANIFOLD |
006 | N 000835 010046 |
| 372 | STUD | 002 | N 000835 010047 |
| 378 | STUD BOLT CHAIN TIGHTENER HOUSING |
001 | N 000939 008048 |
| 384 | CONNECTION PIPE SOCKET | 001 | A 621 016 05 29 |
| 390 | SEAL RING | 001 | N 007603 030100 |
| 395 | VALVE GUIDE Zastąpiono przez: A 130 050 01 24 |
- | A 130 050 00 24 |
| 395 | VALVE GUIDE NO LONGER AVAILABLE,INSTAED 130 050 01 24 |
- | A 130 050 01 24 |
| VALVE GUIDE INTAKE |
006 | A 130 050 01 24 | |
| VALVE GUIDE REPAIR SIZE; INTAKE 14.20 MM |
006 | A 130 050 02 24 | |
| VALVE GUIDE REPAIR SIZE; INTAKE 14.40 MM |
006 | A 130 050 03 24 | |
| SNAP RING REPAIR SIZE |
006 | N 009045 014000 | |
| VALVE GUIDE 920 10/50,20/60 046718 920 12/52,22/62 028664 924 10/50,20/60 000005 NO LONGER AVAILABLE Zastąpiono przez: A 108 050 05 24 |
- | A 108 050 00 24 | |
| 401 | VALVE GUIDE Zastąpiono przez: A 108 050 06 24 |
- | A 108 050 05 24 |
| 401 | VALVE GUIDE NO LONGER AVAILABLE,INSTAED 180 050 06 24 10/50,20/60 026488 12/52,22/62 015531 924,12/52,22/62 NEW PART NO. FROM SERIES PRODUCTION START |
- | A 108 050 06 24 |
| VALVE GUIDE 920 10/50,20/60 046718 920 12/52,22/62 028664 924 10/50,20/60 000005 NO LONGER AVAILABLE Zastąpiono przez: A 108 050 06 24 |
- | A 108 050 01 24 | |
| VALVE GUIDE EXHAUST 10/50,20/60 026488 12/52,22/62 015531 924,12/52,22/62 NEW PART NO. FROM SERIES PRODUCTION START |
006 | A 108 050 06 24 | |
| VALVE GUIDE 920 10/50,20/60 046718 920 12/52,22/62 028664 924 10/50,20/60 000005 NO LONGER AVAILABLE Zastąpiono przez: A 108 050 07 24 |
- | A 108 050 02 24 | |
| VALVE GUIDE REPAIR SIZE; EXHAUST 15.20 MM 10/50,20/60 026488 12/52,22/62 015531 924,12/52,22/62 NEW PART NO. FROM SERIES PRODUCTION START |
006 | A 108 050 07 24 | |
| VALVE GUIDE 920 10/50,20/60 046718 920 12/52,22/62 028664 924 10/50,20/60 000005 NO LONGER AVAILABLE THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE Zastąpiono przez: A 108 050 08 24 |
- | A 108 050 03 24 | |
| VALVE GUIDE REPAIR SIZE; EXHAUST 15.40 MM 10/50,20/60 026488 12/52,22/62 015531 924,12/52,22/62 NEW PART NO. FROM SERIES PRODUCTION START |
006 | A 108 050 08 24 | |
| 409 | SNAP RING REPAIR SIZE; EXHAUST |
006 | N 009045 014000 |
| GASKET KIT Zastąpiono przez: A 180 010 02 80 |
- | A 180 586 27 90 | |
| GASKET KIT Zastąpiono przez: A 180 010 03 80 |
- | A 180 586 31 90 | |
| GASKET KIT Zastąpiono przez: A 180 010 65 21 |
- | A 180 010 02 80 | |
| GASKET KIT CYLINDER HEAD |
001 | A 180 010 65 21 | |
| 415 | REPAIR KIT REPAIR SIZE I;0.25MM NARROWER |
001 | A 130 586 02 05 |
| 421 | WASHER CAMSHAFT BEARING TO CYLINDER HEAD |
004 | N 000433 008406 |
| 426 | NUT Zastąpiono przez: N 304032 008006 |
- | N 000934 008010 |
| 426 | NUT CAMSHAFT BEARING TO CYLINDER HEAD |
004 | N 304032 008006 |
| 432 | CYLINDER HEAD GASKET Zastąpiono przez: A 180 016 46 20 |
- | A 180 016 34 20 |
| 432 | CYLINDER HEAD GASKET | 001 | A 180 016 46 20 |
| SCREW | 002 | N 000912 008008 | |
| WASHER | 002 | N 000433 008406 | |
| SCREW | 001 | N 000912 008203 | |
| WASHER | 001 | N 000433 008406 | |
| 439 | SCREW Zastąpiono przez: N 000912 012039 |
- | N 000912 012038 |
| 439 | SCREW | 008 | N 000912 012039 |
| 444 | WASHER | 008 | A 110 016 04 76 |
| BRACKET Zastąpiono przez: A 115 016 00 38 |
- | A 180 016 05 38 | |
| 449 | BRACKET | 003 | A 115 016 00 38 |
| SCREW | 006 | N 000912 012031 | |
| WASHER | 006 | A 110 016 04 76 | |
| WASHER | 006 | A 110 016 04 76 | |
| 455 | OIL LINE | 001 | A 180 180 01 27 |
| 461 | SCREW OIL PIPE TO CAMSHAFT BEARING NO.1 |
001 | N 000912 006010 |
| 467 | SPRING WASHER OIL PIPE TO CAMSHAFT BEARING NO.1 |
001 | N 000137 006204 |
| 472 | CLAMP Zastąpiono przez: A 123 995 13 20 |
- | A 121 995 04 20 |
| 472 | CLAMP OIL PIPE TO CAMSHAFT BEARINGS NOS.2/3/ 4 |
003 | A 123 995 13 20 |
| SCREW OIL PIPE TO CAMSHAFT BEARINGS NOS.2/3/ 4 |
003 | N 000933 004003 | |
| SPRING WASHER OIL PIPE TO CAMSHAFT BEARINGS NOS.2/3/ 4 |
003 | N 000137 004200 | |
| CYLINDER HEAD COVER 920 10/50,20/60 046435 920 12/52,22/62 028551 924 10/50,20/60 000004 924 12/52,22/62 000001 Zastąpiono przez: A 180 010 26 30 |
- | A 180 010 25 30 | |
| 477 | CYLINDER HEAD COVER 920 10/50,20/60 046481 920 12/52,22/62 028570 920 10/50,20/60 000004 FOR COMPONENT PARTS, SEE SPARE PARTS LIST 042 |
001 | A 180 010 26 30 |
| 482 | SEAL RING BREATHER PIPE |
001 | N 007603 018100 |
| 487 | FITTING BREATHER PIPE |
001 | A 615 997 00 72 |
| 493 | FILLER CAP 920 10/50,20/60 046435 920 12/52,22/62 028551 924 10/50,20/60 000004 924 12/52,22/62 000001 |
001 | A 136 501 00 54 |
| CAP THE OLD PART MUST NO LONGER BE INSTALLED Zastąpiono przez: A 102 018 04 02 |
- | A 102 018 03 02 | |
| CAP Zastąpiono przez: A 102 018 08 02 |
- | A 102 018 04 02 | |
| CAP Zastąpiono przez: A 111 018 03 02 |
- | A 102 018 08 02 | |
| CAP FILLER CAP 920 10/50,20/60 046481 920 12/52,22/62 028570 920 10/50,20/60 000004 FOR COMPONENT PARTS, SEE SPARE PARTS LIST 042 |
001 | A 111 018 03 02 | |
| 499 | SEAL RING 920 10/50,20/60 046435 920 12/52,22/62 028551 924 10/50,20/60 000004 924 12/52,22/62 000001 |
001 | A 180 997 02 40 |
| GASKET Zastąpiono przez: A 102 018 03 80 |
- | A 102 018 00 80 | |
| GASKET 38.5X59 MM; TO 102 018 08 02 |
- | A 102 018 03 80 | |
| GASKET 47.5X59 MM; TO 111 018 03 02 |
001 | A 111 018 00 80 | |
| 504 | GASKET | 001 | A 123 016 00 21 |
| 509 | SCREW | 003 | N 000931 008168 |
| 513 | SEAL RING | 003 | N 915035 000003 |
Copyright © 2024 WebAutoCat.com. All rights reserved. Terms of Use | Privacy Policy